Bike Clothing, Shoes & Helmets on Sale

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

Redefine Your Comfort Zone. To make a DH-certified full face with the ventilation and fit of a half shell, the Specialized development team took a fully integrated approach when creating the Gambit. Every component was engineered utilizing a comprehensive approach resulting in truly breakthrough performance where the Gambit delivers more than the sum of its parts. - Combines a lightweight carbon fiber shell, structurally specific polycarbonate backing, and five optimized pieces of targeted density foam (patent pending) for reduced weight, optimized fit, and increased ventilation. ASTM DH (1952) certified. - Tune a more precise, personalized fit thanks to Gambit's adjustable Integrated Fit System that accommodates variations in head shape and occipital base. - Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synched. - 4-position adjustable cheek pads provide fit refinement for any head shape. - Integrated, fixed visor with a breakaway feature provides a wide field of view while protecting against trail debris. - Average weight: 640 grams (medium). - Increased airflow and improved ventilation from the SBC Integrated Fit System does away with the excessive padding of a traditional full-face friction fit. - MIPS SL with our exclusive perforated backing integrates MIPS technology within the helmet padding and reduces moisture retention while increasing breathability. - Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet. 4D brow cooling provides a gap between the helmet and forehead, drawing airflow into internal air channels at every speed. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor.

Whether you're waiting at the meetup spot or suiting up for the descent, our Men's Packable Down Jacket is built for the coldest parts of the ride. ALLIED Feather + Down Fill and PrimaLoft® Bio™ combine to create lightweight insulation that keeps you warm when you need it to but packs small when it's time to stow the cycling jacket in a jersey pocket. To help block the chill when temperatures drop, a roomy hood fits over your helmet to lock in the heat. The semi-form fit makes it easy to layer over your other cold weather gear. - ALLIED Feather + Down Fill is blended with PrimaLoft® Bio™ to create a sustainable synthetic insulation that's packable, lightweight, and warm. - An over-the-helmet hood keeps your head protected from the elements. - Fabric Content: SHELL A: 100% Nylon - FILL/INSULATION A: 90% Down, 10% White Goose Feather, 800 Fill Power - FILL/INSULATION B: 100% Polyester PCR with Bio Staple Cut Fibers, 100% Reycycled Content

Whether you're waiting at the meetup spot or suiting up for the descent, our Women's Packable Down Jacket is built for the coldest parts of the ride. ALLIED Feather + Down Fill and PrimaLoft® Bio™ combine to create lightweight insulation that keeps you warm when you need it to but packs small when it's time to stow the cycling jacket in a jersey pocket. To help block the chill when temperatures drop, a roomy hood fits over your helmet to lock in the heat. The semi-form fit makes it easy to layer over your other cold weather gear. - ALLIED Feather + Down Fill is blended with PrimaLoft® Bio™ to create a sustainable synthetic insulation that's packable, lightweight, and warm. - An over-the-helmet hood keeps your head protected from the elements. - Fabric Content: SHELL A: 100% Nylon - FILL/INSULATION A: 90% Down, 10% White Goose Feather, 800 Fill Power - FILL/INSULATION B: 100% Polyester PCR with Bio Staple Cut Fibers, 100% Reycycled Content

Performance and fit by Specialized - BLING by Supacaz! Dual BOA® Fit System for a fast, effortless, precision fit Dual functioning VaporX™ system ventilates air through the shoe and channels moisture out, keeping your feet cool & dry At the core of the Kazze is an unbelievably stiff NASA grade 3K carbon sole that resists flexing and twisting under the highest loads HeliumHeel™ With Super Stiff 3K Carbon Sole Asymmetrical Tongue: Maximum comfort and ultra secure with no pressure points. Breathable Ergonomic Insole With Anatomic Intelligence (Ai) Technology - R&D that optimizes ergonomics and comfort Durable outer shell material 3 Bolt Road Cleat Pattern

We get it, rain rides are often not enjoyable. But with the new Race-Series Rain Jacket, we're hoping to change that. With the latest technology in waterproofing, Polartec Neoshell, this jacket is extremely breathable and stretchy, all while being completely waterproof making that wet ride just a little more pleasant. Top if off with our HyprViz color treatment that increases your visibility to motorists, and you're left with a great option for nasty days. - Fabric Content: 61% Nylon, 31% Polyester, 8% PU - Four-way stretch knit Neoshell allows us to make this a truly Form-Fit Road Cycling Jacket, eliminating all wrinkles, flapping, and bagginess from the garment. - Fully taped seams prevent water intrusion, keeping you dry and protected for years to come. - Hyper Green Polartec Neoshell is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Neoshell provides true dynamic breathability allowing air to pass through without heat pressure build-up, allowing it to breathe as soon as you need it. Matched with a full stretch membrane allowing for a full range of motion without compromise. - Watertight YKK AquaGuard zippers prevent unwanted water seepage. - Woven Polartec Neoshell fabric is the industry standard in breathable waterproof fabric solutions.

We get it, rain rides are often not enjoyable. But with the new Race-Series Rain Jacket, we're hoping to change that. With the latest technology in waterproofing, Polartec Neoshell, this jacket is extremely breathable and stretchy, all while being completely waterproof making that wet ride just a little more pleasant. Top if off with our HyprViz color treatment that increases your visibility to motorists, and you're left with a great option for nasty days. - Fabric Content: 61% Nylon, 31% Polyester, 8% PU - Four-way stretch knit Neoshell allows us to make this a truly Form-Fit Road Cycling Jacket, eliminating all wrinkles, flapping, and bagginess from the garment. - Fully taped seams prevent water intrusion, keeping you dry and protected for years to come. - Hyper Green Polartec Neoshell is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Neoshell provides true dynamic breathability allowing air to pass through without heat pressure build-up, allowing it to breathe as soon as you need it. Matched with a full stretch membrane allowing for a full range of motion without compromise. - Watertight YKK AquaGuard zippers prevent unwanted water seepage. - Woven Polartec Neoshell fabric is the industry standard in breathable waterproof fabric solutions.

We get it, rain rides are often not enjoyable. But with the SL Rain Jacket, we're hoping to change that. With the latest technology in waterproofing, Polartec NeoShell, this jacket is extremely breathable and stretchy, all while being completely waterproof—making that wet ride just a little more pleasant. Top it off with our HyprViz color treatment that increases your visibility to motorists, and you're left with a great option for nasty days. - Three back pockets help to secure all your ride needs, right where you want them. - Fully taped seams prevent water intrusion, keeping you dry and protected for years to come. - Watertight YKK AquaGuard zippers prevent unwanted water seepage. - Fabric Content: 61% Nylon, 31% Polyester, 8% PU

We get it, rain rides are often not enjoyable. But with the Men's SL Rain Jacket, we're hoping to change that. With the latest technology in waterproofing, Polartec® NeoShell®, this jacket is extremely breathable and stretchy, all while being completely waterproof—making that wet ride just a little more pleasant. Top it off with our HyprViz color treatment that increases your visibility to motorists, and you're left with a great option for nasty days. - Fully taped seams prevent water intrusion, keeping you dry and protected for years to come. - Watertight YKK AquaGuard® zippers prevent unwanted water seepage. - Fabric Content: 61% Nylon, 31% Polyester, 8% PU

On a mission to make wet rides a little more enjoyable, we've developed the new Men's Trail-Series Rain Jacket. With the latest technology in waterproofing, Polartec Neoshell, this jacket is extremely breathable and stretchy, all while being completely waterproof. And with a relaxed fit, it's right at home on both the trail and around town. - An over-the-helmet hood with a rain visor and adjustable drawcord keeps your head protected from the elements. - Fabric Content: 90% Polyester, 10% Spandex - Fully taped seams prevent water intrusion, keeping you dry and protected for years to come. - Neoshell provides true dynamic breathability allowing air to pass through without heat pressure build-up, allowing it to breathe as soon as you need it. Matched with a full stretch membrane allowing for a full range of motion without compromise. - Relaxed Fit is loose and comfortable, and also provides plenty of room for layering underneath. - Watertight YKK AquaGuard zippers prevent unwanted water seepage. - Woven Polartec Neoshell fabric is the industry standard in breathable waterproof fabric solutions.

We get it, rain rides are often not enjoyable. But with the SL Rain Jacket, we're hoping to change that. With the latest technology in waterproofing, Polartec NeoShell, this jacket is extremely breathable and stretchy, all while being completely waterproof—making that wet ride just a little more pleasant. - Fabric Content: 61% Nylon, 31% Polyester, 8% PU - Fully taped seams prevent water intrusion, keeping you dry and protected for years to come. - Watertight YKK AquaGuard zippers prevent unwanted water seepage.

While finding the perfect jacket at either end of the temperature spectrum is pretty easy, the temperature range in between is where you'll spend the majority of your time on the road—and that's where the SL Pro Softshell Jacket shines. It's stretchy, wind- and water-resistant and is sure to keep you warm in the Shoulder Season. - Fabric Content: FRONT: 88% Polyester, 12% Polyurethane; OTHER: 84% Polyamide, 16% Elastane - Three back pockets and secure zipper pocket help to secure all your ride needs, right where you want them.

We get it, rain rides are often not enjoyable. But with the SL Rain Jacket, we're hoping to change that. With the latest technology in waterproofing, Polartec NeoShell, this jacket is extremely breathable and stretchy, all while being completely waterproof—making that wet ride just a little more pleasant. - Fabric Content: 61% Nylon, 31% Polyester, 8% PU - Fully taped seams prevent water intrusion, keeping you dry and protected for years to come. - Watertight YKK AquaGuard zippers prevent unwanted water seepage.

While finding the perfect jacket at either end of the temperature spectrum is pretty easy, the temperature range in between is where you'll spend the majority of your time on the road—and that's where the SL Pro Softshell Jacket shines. It's stretchy, wind- and water-resistant and is sure to keep you warm in the Shoulder Season. - Fabric Content: FRONT: 88% Polyester, 12% Polyurethane; OTHER: 84% Polyamide, 16% Elastane - Three back pockets and secure zipper pocket help to secure all your ride needs, right where you want them.

At a mere 150 grams, the S-Works EXOS are the lightest cycling shoes to ever come with a Boa® dial. And not only are they ridiculously light, but they still have all the features that are synonymous with the S-Works label. They’re still at that World Tour level, just ridiculously light. To get the weight down to the 150-gram mark without sacrificing power transfer, we implemented all the engineering bells and whistles we could think of. And when that wasn’t enough, we thought up some more. The carbon outsole was developed using an advanced form of Finite Element Analysis and pressure mapping to pull out material where it wasn’t needed. This allowed us to keep crazy-high stiffness numbers, too. For the uppers, we completely removed the heel counter. And with a little help from the space-grade Dyneema® mesh and some CubicTec reinforcement, the heel molds to the back of your foot, so nary a watt is wasted. Lastly, we developed a new Warp Sleeve vamp that let us get rid of the toe box, and this further cut down the weight and increased the comfort. Of course we couldn't do any of the above without including our coveted Body Geometry features, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but to also increase efficiency and to reduce the risk of injury. The S-Works EXOS are the lightest cycling shoes to ever have a Boa® dial—experience the feeling of lightness. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 13.0 - A revolutionary Dyneema® Mesh allows us to achieve weight without sacrificing hold for the ultimate connection and comfort. - BOA IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a Warp Sleeve vamp for the ultimate in connectivity, comfort, and speed. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 140g (1/2 pair, Size 42)

Our new Legacy Alpha Jacket brings everyday style with some serious warmth. With 90g Polartec Alpha breathable insulation, this "puffy" is super–warm—warm enough for a chilly morning stroll, or even a winter commute. - Deflect UV 50+ protects against harmful UV rays. - Fabric Content: MAIN BODY: 86% Nylon, 14% Spandex; LINING: 100% Polyester; OTHER: 78% Polyester, 22% Elastane - Insulated hood keeps your neck, ears, and top of head warm while waiting at the finish line for your team to post up. - Regular Fit is Relaxed and Comfortable. - Two front hand pockets keep your hands warm off the bike and provide room for your small essentials and electronics. - Woven outer shell is combined with 90g Polartec Alpha breathable insulation to create the ultimate packable, breathable, and warming insulation piece.

When you ride in frigid conditions, your options for lightweight insulation under your outerwear are limited. It's typically been an fleece jersey with rear pockets that only adds to bulk and weight. Insulation with a high warmth to weight ratio, like down feathers or polyester fiber-fill are ideal, but those materials need to be encapsulated with a coated fabric to contain them, cutting breathability down to zero. Our solution is Polartec Alpha insulation that provides insulation without the need to encapsulate, giving you unimpeded breathability for a warm, dry ride. The outer shell is lightweight and uncoated, furthering the flow of perspiration and allowing the piece to packable when you need to de-layer when things get too hot. The jacket is designed to be worn under an outer jacket, such as our Deflect H2O pieces, so the fit is close to the body to eliminate any bulk. An under-the-helmet hood provides an added wind layer and traps heat in were you lose it, at the top of your head, and we finish off the neck and wrists with reflective binding for visiability in case you're caught out after sundown. - Woven Pertex Quantum Air outer-shell is combined with 90g Polartec Alpha breathable insulation to create the ultimate packable, breathable, and warming insulation piece. - Non-insulated hood is intended to be used under the helmet to keep the wind at bay and to trap heat on cold rides. - Two front hand pockets keep your hands warm off the bike and provide room for your small essentials and electronics. - Edge binding at the wrists and collar seal in warmth and feature reflective tape woven-in for increased visibility to motorists in low-light conditions. - Deflect UV 50+ protects against harmful UV rays. - Fit is close to body for layering under outerwear. For a looser "street fit," we recommend one size up. - Shell fabric weight: 48g

Redefine Your Comfort Zone. To make a DH-certified full face with the ventilation and fit of a half shell, our development team took a fully integrated approach when creating the Gambit. Every component was engineered utilizing a comprehensive approach resulting in truly breakthrough performance where the Gambit delivers more than the sum of its parts. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - Combines a lightweight carbon fiber shell, structurally specific polycarbonate backing, and five optimized pieces of targeted density foam (patent pending) for reduced weight, optimized fit, and increased ventilation. ASTM DH (1952) certified. - Tune a more precise, personalized fit thanks to Gambit's adjustable Integrated Fit System that accommodates variations in head shape and occipital base. - Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synched. - 4-position adjustable cheek pads provide fit refinement for any head shape. - Integrated, fixed visor with a breakaway feature provides a wide field of view while protecting against trail debris. Average weight: 640 grams (medium). - Increased airflow and improved ventilation from the SBC Integrated Fit System does away with the excessive padding of a traditional full-face friction fit. - MIPS SL with our exclusive perforated backing integrates MIPS technology within the helmet padding and reduces moisture retention while increasing breathability. - Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet. 4D brow cooling provides a gap between the helmet and forehead, drawing airflow into internal air channels at every speed. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor.

Redefine Your Comfort Zone. To make a DH-certified full face with the ventilation and fit of a half shell, our development team took a fully integrated approach when creating the Gambit. Every component was engineered utilizing a comprehensive approach resulting in truly breakthrough performance where the Gambit delivers more than the sum of its parts. For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - 4-position adjustable cheek pads provide fit refinement for any head shape. - Average weight: 640 grams (medium). - Combines a lightweight carbon fiber shell, structurally specific polycarbonate backing, and five optimized pieces of targeted density foam (patent pending) for reduced weight, optimized fit, and increased ventilation. ASTM DH (1952) certified. - Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet. 4D brow cooling provides a gap between the helmet and forehead, drawing airflow into internal air channels at every speed. - Increased airflow and improved ventilation from the SBC Integrated Fit System does away with the excessive padding of a traditional full-face friction fit. - Integrated, fixed visor with a breakaway feature provides a wide field of view while protecting against trail debris. - MIPS SL with our exclusive perforated backing integrates MIPS technology within the helmet padding and reduces moisture retention while increasing breathability. - Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synced. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Tune a more precise, personalized fit thanks to Gambit’s adjustable Integrated Fit System that accommodates variations in head shape and occipital base.

On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, "What shoes are those?" - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals.

Cold legs equal less circulation, and less circulation equals reduced performance. So when the temperature dips, pull on a pair of the SL Pro Thermal Bib Tights. They feature Italian ThermoRoubaix, brushed-back, stretch fleece that's soft, warm, and compressive—making them the perfect option for chilly training rides. And to top off the comfort, we've used our Body Geometry 3D Contour Chamois with a variable density design that places support and padding where you need it, not where you don't. - Fabric Content: MAIN: 52% Polyamide, 32% Polyester, 16% Elastane; OTHER: 55% Polyamide, 28% Polyester, 17% Elastane - Made from ThermoRoubaix brushed-back stretch fleece, these Bib Tights provide compressive warmth and a soft feel against the skin.

Cold legs equal less circulation, and less circulation equals reduced performance. So when the temperature dips, pull on a pair of the SL Pro Thermal Bib Tights. They feature Italian ThermoRoubaix, brushed-back, stretch fleece that's soft, warm, and compressive—making them the perfect option for chilly training rides. And to top off the comfort, we've used our Body Geometry 3D Contour Chamois with a variable density design that places support and padding where you need it, not where you don't. - Fabric Content: MAIN: 52% Polyamide, 32% Polyester, 16% Elastane; OTHER: 55% Polyamide, 28% Polyester, 17% Elastane - Made from ThermoRoubaix brushed-back stretch fleece, these Bib Tights provide compressive warmth and a soft feel against the skin.

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, "What shoes are those?" - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals.

Our Prime-Series Alpha Jacket utilizes Polartec Alpha to bring warmth to your cold-weather days. The soft, inside liner quickly evaporates sweat keeping you warm and dry and with a semi-form fit, it's a great layering option. - Alpha technology eliminates the need for a backing fabric, which allows the fabric to be in direct contact with your skin. - Exterior shell fabric is engineered to allow this jacket to breathe even better and move moisture from the insulation to the exterior to dry; keeping you dryer than ever before. - Fabric Content: SHELL: 85% Nylon, 15% Spandex; LINING: 100% Polyester. - Lofted fibers keep you extremely warm while allowing sweat and heat to expel from your body. - Polartec Alpha Direct Insulation increases breathable performance in this super lightweight mid-layer. - Semi-Form Fit Road Jacket is close to the body for layering under outwear.

On a mission to make wet rides a little more enjoyable, we've developed the new Women's Trail-Series Rain Jacket. With a three-layer woven fabric, this jacket is extremely breathable, all while being completely waterproof. And with a relaxed fit, it's right at home on both the trail and around town. - 3-layer Laminated Shell is a woven fabric that's wind-resistant, water-proof, and highly breathable in order to maintain an effective barrier between you and elements. - Fully taped seams prevent water intrusion, keeping you dry and protected for years to come. - Watertight YKK AquaGuard zippers prevent unwanted water seepage. - An over-the-helmet hood with a rain visor and adjustable drawcord keeps your head protected from the elements. - Relaxed Fit is loose and comfortable, and also provides plenty of room for layering underneath. - Fabric Content: 100% Polyester

Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6-Snap dials for easy adjustment, backed by the Boa Lifetime Guarantee - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction - Relaxed Fit for a balance of pedal feel and off-bike comfort - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)

The new S-Works 7 Lace takes the performance of the winningest road shoe in the world and combines it with laces to create one of our most supple and adaptable uppers for next-level fit. Paired with our Body Geometry technology for optimum foot, knee, and ankle alignment, going fast never looked so good. By utilizing laces, the shoe offers 12 separate points of tension adjustment to dial in the perfect hold across the entire foot, while the removal of plastic hardware allows the engineered mesh upper to adapt to more foot shapes for a sublime, supple fit. The S-Works 7 Lace fits like a leather glove, but you know, for your foot and made of engineered mesh and carbon. But laces have more to bring to the party. The removal of plastic hardware also shaves considerable weight. One size 44 S-Works 7 Lace weighs a feathery 236 grams, so you’ll be looking good and feeling good when the road points uphill. The foundation for all this is the technology pioneered for the S-Works 7. Our Powerline carbon outsole—our lightest and stiffest outsole ever—creates the ideal platform for power delivery. Our PadLock heel comfortably holds the rear of your foot, while the engineered mesh upper delivers a stable yet supple hold for all-day power delivery. Whether you’re looking for a relaxed coffee ride shoe, a lightweight climber, or a supple and adaptive fit that compliments your race shoe, the S-Works 7 Lace marries classic style to race-winning heritage and performance. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Non-stretch laces provide even hold across the entire foot that stays consistent all ride long. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0. - Engineered mesh is combined with no-stretch TPU zones for the ultimate connection and comfort. - PadLock™ heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximately 236g per shoe (size 44)

Whether you're waiting at the meetup spot or suiting up for the descent, our Men's Packable Down Jacket is built for the coldest parts of the ride. ALLIED Feather + Down Fill and PrimaLoft Bio combine to create lightweight insulation that keeps you warm when you need it to but packs small when it's time to stow the cycling jacket in a jersey pocket. To help block the chill when temperatures drop, a roomy hood fits over your helmet to lock in the heat. The semi-form fit makes it easy to layer over your other cold weather gear. - ALLIED Feather + Down Fill is blended with PrimaLoft Bio to create a sustainable synthetic insulation that's packable, lightweight, and warm. - An over-the-helmet hood keeps your head protected from the elements. - Fabric Content: SHELL A: 100% Nylon - FILL/INSULATION A: 90% Down, 10% White Goose Feather, 800 Fill Power - FILL/INSULATION B: 100% Polyester PCR with Bio Staple Cut Fibers, 100% Reycycled Content

Whether you’re waiting at the meetup spot or suiting up for the descent, our Women’s Packable Down Jacket is built for the coldest parts of the ride. ALLIED Feather + Down Fill and PrimaLoft Bio combine to create lightweight insulation that keeps you warm when you need it to but packs small when it’s time to stow the cycling jacket in a jersey pocket. To help block the chill when temperatures drop, a roomy hood fits over your helmet to lock in the heat. The semi-form fit makes it easy to layer over your other cold weather gear. - ALLIED Feather + Down Fill is blended with PrimaLoft Bio to create a sustainable synthetic insulation that’s packable, lightweight, and warm. - An over-the-helmet hood keeps your head protected from the elements. - Fabric Content: SHELL A: 100% Nylon - FILL/INSULATION A: 90% Down, 10% White Goose Feather, 800 Fill Power - FILL/INSULATION B: 100% Polyester PCR with Bio Staple Cut Fibers, 100% Recycled Content