Filter By:
- 24-Inch & Smaller (26)
- 26-Inch (48)
- 650B (89)
- 29-Inch (100)
- 700c, 27-Inch & 650c (148)
- Fat Bike (1)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels
$976.00
- Versatile aero wheelset for the modern road bike with tubeless and hookless rim profile
- Optimized tire bed for easy tire installation
- Wide 23mm rim profile creates a better tire interface to be fast on or off the road
- New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement
- Ships with 12mm front and rear end caps
- Center locking rotor interface. Lockring is included with the wheels
- 1470g
- Lifetime warranty
$1,002.00
Zipp's 3ZERO MOTO carbon 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective.
While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most.
At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain.
Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride.
- Higher impact resistance
- Reduced chance of pinch flatting
- More traction in rough corners
- Smoother ride in rocky terrain
- Ability to run lower tire pressure
- Reduced rider fatigue
- Frustration-free tire installation
- Rim is designed for compliance, creating the feel of extra suspension
- German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability
- Lifetime Warranty
$99.99
- Position Front
- Wheel Diameter/ISO 700C / 622
- Axle Type QR
- Hub Spacing 100mm
- Wheel-Brake Comp. Rim and Disc IS 6-bolt
- Freehub Body -
- Wheel Tire Type Clincher
- Rim Material Aluminum
- Rim Construction Double wall
- Rim Internal Width 18.4mm
- Rim inner width range 0-21.9mm
- Rim Color Black
- Rim Drilling 36
- Hub Model Shimano HB-M475
- Wheel Weight -
- Spoke Type Stainless
- Valve Schrader
- Rim External Width 24.4mm
- Depth 16mm
- Rim Model Alex DM18
- Skewers Included Yes
$1,899.00
Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheelset yet, making it a fast-puncher ready to fight its way into the breakaway.
Zipp's use of a hookless (straight side) rim in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable.
Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff.
The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride.
At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability.
- Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile
- Our lightest tubeless wheel yet, making it a fast-puncher ready to fight
- Optimized tire bed for easy tire installation
- TSE for greater efficiency and reduced rolling resistance
- Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth
- Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction
- Ships with 12mm end caps
- Center Lock rotor interface. Lockring is included
- Zipp graphics applied using Zipp's ImPress direct-print technology
- Lifetime warranty
$996.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all.
Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider.
The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits.
- New Zipp graphics and cosmetic identity that scream speed
- Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile
- Lighter weight than its predecessor, making it nimble and fast
- Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire.
- Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road
- 40mm rim depth makes a light and aero wheel in every situation
- Ships with 12mm end caps
- Center Lock rotor interface (lockring included)
$2,000.00
- Zipp's most advanced and fastest deep-rim wheel for road, triathlon, and time trialing
- More than 300 grams lighter that previous model
- Optimized tire bed for easy tire installation
- Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth
- Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial Clutch V2 technology reduces drag and lowers friction
- Center locking rotor interface. Lockring is included with the wheels
- Zipp graphics applied using Zipp's ImPress direct-print technology
- Minimum 25mm tire width
- Lifetime Warranty
- Wheel Diameter/ISO: 700C / 622
- Wheel Tire Type: Hookless - Tubeless
$925.00
- Rim shape, width, and depth designed for the modern disc brake bike
- Perfect, high performance all rounder set for mixed terrains, speeds and road conditions.
- Hooked rim means you can run any tire, any pressure without risk of tire blowoff
$239.00
Control and stability for enduro riding.
Details
- Wheels sold individually not in sets.
- Tuned Front and Rear Alloy Wheel System for enduro riding and racing.
- Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding.
- Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning.
- Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip.
- Welded and sleeved rim joint for additional strength.
$109.99
- Position Front
- Wheel Diameter/ISO 700C / 622
- Axle Type QR
- Hub Spacing 100mm
- Wheel-Brake Comp. Rim
- Freehub Body -
- Wheel Tire Type Clincher
- Rim Material Aluminum
- Rim Construction Double wall
- Rim Internal Width 13.9mm
- Rim inner width range 0-21.9mm
- Rim Color Black
- Rim Drilling 32
- Hub Model Shimano Sora HB-RS300
- Wheel Weight -
- Spoke Type Stainless
- Valve Presta
- Rim External Width 19.6mm
- Depth 22mm
- Rim Model Alex DA22
- Skewers Included Yes
$899.99
SURVIVAL OF THE STRONGEST
More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track.
STRONG LIKE BULL (NO BULL)
Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made.
SMOOTH AND STRONG
Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength.
HIGH PRECISION HANDLING
The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed.
SAYONARA PINCH FLATS
Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites."
AIR TIME
Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs.
INTENDED USE
Aggressive Trail, Park, Enduro
WEIGHT (29): 1,706g 240 EXP (with valve and tape)
WHEEL SIZES
29 (F/R) 27.5 (R)
FOR LIFE
Lifetime warranty on Roval Wheels when registered
within the first 90 days of purchase.
2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered.
STRUCTURAL WEIGHT LIMIT
(Rider & Cargo) - 125kg / 275lbs
$600.00
SMOOTHER IS FASTER
Trail riders who prize nimble handling will be blown away by Traverse SL II's category-leading control, strength-to-weight ratio, and pinch-flat resistance.
LIGHTER
At 1,645 grams, this is our lightest trail wheelset ever.
STRONGER
Front and Rear Specific Rims with carbon layups optimized for strength and weight boast 15% greater front wheel strength and 25% more rear wheel strength than the previous Traverse SL.
CONTROL-BOOSTING VERTICAL COMPLIANCE
21% more vertically compliant than the previous Traverse SL (delivered through Shallow Rim Shape and front/rear specific layup) enables enhanced terrain hugging and bump-force absorbing control.
TRACTION MONSTER
Carefully engineered rim shape intentionally flexes for improved support and traction to boost confidence and control.
TOUGH LIFE, LONG LIFE
Engineered rim offset enables balanced spoke tension for improved fatigue life. Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase.
SAYONARA PINCH FLATS
Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites."
AIR TIME
Thank our genius engineer Chuck Teixeira for inventing the "Roval ThreadBed Valve"; a valve that threads
directly into the rim eliminating compression nuts, air loss from rim flex, and makes tire set-up easier, and reduces sealant clogs.
INTENDED USE
Trail
WEIGHT (29)
1,645g 240 EXP (with valve and tape)
WHEEL SIZES: 29
2 Year "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered.
STRUCTURAL WEIGHT LIMIT
(Rider & Cargo) - 125kg / 275lbs
$119.99
- Rims: WTB ST i30 (Black), inner width: 30 mm
- New TCS 2.0 Tubeless system
- Solid Strip (included) protects and ensures a smooth surface between the tire and the rim
- Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation
- Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency
- Drilled for Presta valve
- 32 holes
- Rear hub (1): Formula DHT148 (Black), Laser etched logo, 12mm TA, O.L.D. 148mm BOOST
- Rear hub (2): Formula DC2241 (Black), Laser etched logo, M9x141mm BOOST141
- HG Freehub compatible with 8-10, MTB 11-speed
- 6-bolt disc mount
- Sealed bearings (DC711 & DHT148)
- TA Axles not incl.
- Quick Release binder included (DC2241)
- Tubeless Compatible (Tubeless Valve included)
Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)
$657.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$308.00
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires
- Durable 6069 aluminum with welded joint and reinforced spoke bed
- BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build
- Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.
$657.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$839.99
Exploring your limits has never looked so good. The all new EC90 AX carbon wheelset joins Easton's AX series as high performance, high adventure wheels built to endure. Race-ready weight, reliable design, and fire-road tested durability mean you can seek more while stopping less.
EC90 AX wheels are built to keep you rolling, wherever the path less traveled leads. Wide, 24mm internal rims on both wheelsets are optimized for gravel tires 35mm and larger, giving you a more confident tire stance for control on the ground during your expansive adventure rides, singletrack forays, and unrelenting gravel races. Like all our EC90 wheels laced to Vault disc hubs, the EC90 AX wheelset is covered by our carbon confidence guarantee.
$239.99
- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes
- Black Ops MX1100 hubs with sealed bearings and laced with DT spokes
- 24mm inner rim width supports a variety of modern sizes
- OLD: Front: 100mm, Rear: 110mm
- Gears: Singlespeed freewheel
- Type: Tube only
- Size: 20-inch
$149.99
The Rampage rear wheel rolls on a four-bearing sealed freecoaster hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system.
- Axle: 14mm chromoly (heat-treated)
- Driver: 1-pc chromoly RHD or LHD
- Hardware: Steel(17mm wheel nuts)
- Hub shell bearings: 6002 (x1) & 7902 (x1) verify bearing number on side of rubber seal
- Drilling: 36H
- Weight: 46.4-ounces
$46.49 - $54.49
Sta Tru Rear Wheels
- Single Wall rim
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Valve: Schrader
- Tire Type: Clincher
$49.99 - $61.99
Sta-Tru Double Wall Rear Wheels.
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Valve: Schrader
- Tire Type: Clincher
$79.99
- Position Front
- Wheel Diameter/ISO 700C / 622
- Axle Type QR
- Hub Spacing 100mm
- Wheel-Brake Comp. Rim
- Freehub Body -
- Wheel Tire Type Clincher
- Rim Material Aluminum
- Rim Construction Double wall
- Rim Internal Width 18.4mm
- Rim inner width range 0-21.9mm
- Rim Color Black
- Rim Drilling 36
- Hub Model Shimano Acera HB-T3000
- Wheel Weight -
- Spoke Type Stainless
- Valve Schrader
- Rim External Width 24.4mm
- Depth 16mm
- Rim Model Alex DM18
- Skewers Included Yes
$596.00
Nowadays, road riding is much more than riding on a road. Gravel, rough roads, fenders, lights and racks have broadened the horizon and ER 1400 is the premium alloy choice. It's 20mm, super light and resilient rim and 240s based hub is just what you need when rides lead into the unknown.
- 240s based Spline hub with 36t ratchet system
- Straight-pull hub and spokes are laced 2-cross
- Includes tubeless ready tape and tubeless valve
$99.99 - $114.99
- Rims: WTB ST i23 (Black), inner width: 23 mm
- New TCS 2.0 Tubeless system
- Solid Strip (included) protects and ensures a smooth surface between the tire and the rim
- Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation
- Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency
- Drilled for Presta valve
- 32 holes
- Rear hub (1): Shimano FH-MT400 (Black), Shimano logo, 12mm E-THRU, O.L.D. 142mm
- Rear hub (2): Shimano FH-MT4050 (Black), Shimano logo, M10x135mm
- HG Freehub compatible with 8—10, MTB 11-speed
- Center Lock disc mount
- Adjustable bearings
- Rear Quick Release binder included (FH-MT4050)
- E-THRU Axles not included
- Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)
- Tubeless Compatible (Valve and Tape not included)
$60.99 - $62.49
Sta-Tru Double Wall Front Wheels.
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 26-inch x 1 3/8
- ISO Diameter: 590 / 26 x 1 3/8-inch
- Front Axle: 3/8-inch x 100mm
- Valve: Schrader
- Tire Type: Clincher
$77.49 - $92.99
- STW ST1 26.5mm wide alloy rims
- KT QR ATB 9mm/100/108 axle
- Black or Silver UCP spokes
$649.99
- Eclypse DB743 Carbon
- One piece molding
- Inner Rim Width: 43 mm
- Outer rim Width: 50 mm
- Rim Height: 25 mm
- Tubeless ready, requires tubeless tape/rim strip, not included
- Presta valve
- 28 holes
- DT Champion - Black
$499.99
The disc brake road revolution has arrived. The EA90 SL Disc combines the stout 19.5-millimeter internal tubeless EA90 SL rim with Easton’s M1 6-bolt disc hubs that have received an A+ Future-Proof rating by Velonews. Hubs easily converts from out of the box 9x100 and 10x135 quick release to 15x100 & 12x100; parts sold separately. These wheels are light, fast and bombproof. Best of all, they rely on standard Sapim double-butted straight-pull spokes and straight-pull spokes and standard external alloy nipples, so they’re easy to maintain and service.
$67.99
- Position Front
- Wheel Diameter/ISO 700C / 622
- Axle Type QR
- Hub Spacing 100mm
- Wheel-Brake Comp. Rim
- Freehub Body -
- Wheel Tire Type Clincher
- Rim Material Aluminum
- Rim Construction Single wall
- Rim Internal Width 19.7mm
- Rim inner width range 0-21.9mm
- Rim Color Silver
- Rim Drilling 36
- Hub Model Formula FM-21-QR
- Wheel Weight -
- Spoke Type Steel
- Valve Schrader
- Rim External Width 25mm
- Depth 16mm
- Rim Model Alex X101
- Skewers Included Yes
$657.00
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires
- Durable 6069 aluminum with welded joint and reinforced spoke bed
- BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build
- Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.
$475.00
- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits
- Tie beam triple-cavity rim design resists damage and prevents air loss under impacts
- 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires
- E-sync hubs
Specs:
- Hub Model: E-SYNC
- Freehub Body: Shimano HG
- Wheel Tire Type: Tubeless Ready
- Wheel-Brake Comp.: Disc IS 6-bolt
- Rim Material: Aluminum
- Spoke Type: Sapim D-Light
- Valve: Presta
- Rim Construction: Double wall
Page 1 of 14
Next page