Other

$34.99
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.

$17.99
The Problem Solvers Cross Hanger is the perfect front brake cable hanger for your cyclocross bike with cantilever brakes. Designed for easy installation and maximum braking power, this light, durable aluminum piece is a small but crucial part of your cantilever setup.

$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

$21.99
- Wears and functions like other links on the chain
- SIL-TEC surface treatment
- Tool free installation possible
- TL-CN10 is available as SM-CN900-11
- Single use

$29.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.

$1.98 - $2.25
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

$53.99
Turn your geared bike into a singlespeed machine with Surly's Singleator. The Singleator mounts to your derailleur hanger and provides a smooth, quiet and adjustable means of tensioning the excess chain slack on any bike. It's made from strong forged steel and features a triple-sealed spring, large-cog capacity, chain guides, fully-adjustable chain line, floating pulley, and a stainless-steel pivot bushing. And, it works with both BMX and standard chains.

$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip.
Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

$20.00
Whether for derailleur clamp clearance, tire clearance, or personal preference, sometimes it can be advantageous to run the wheel further back in the dropouts. Monkey Nuts install into Surly horizontal dropouts to make spacing the wheel back easy. There are 3 different sets depending on the type of dropout and axle configuration the dropout is intended for. Simply select the correct version of Monkey Nut, install it into the frame, and slam the wheel all the way forward. Bang, done.

$64.99 - $90.99
The Problem Solvers Cable Doublers are made of light, durable machined and anodized aluminum and they are Teflon coated for a super-smooth cable pull every time. They come in two models. The first allows you to control two brakes with one lever. The second allows you to control one brake with two levers. Why? Well, there are myriad applications: tandems, cyclocross bikes, fixies, tricycles, recumbents, cycles for those with special needs, bike polo bicycles, those 4-person bikes you see on beach boulevards, and so on. You could even link both models of Cable Doublers together for the ultimate in redundancy!

$27.99
The Problem Solvers Quick-Release Nut Light Mount is an ingenious solution when your handlebars are too crowded to accept a light. This fine CNC-machined aluminum post simply screws on in place of your left, front quick-release nut to provide a great place to mount your light. Lower light mounting improves your depth perception and shows more details of the road condition ahead, too.

$23.99
Power Links provide tool free chain assembly.
- 8-speed width: 7.1mm
- 9-speed width: 6.8mm
- Chain Compatibility: SRAM
- Reusable: Yes

$20.00
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

$32.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws

$23.99 - $26.99
This FSA Triple Chainring Nut/Bolt Set feature T-30 Torx sockets to resist stripping and ensure that you have reliably secure chainrings.
- For road triple cranksets
- Torx wrench included

$130.00
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability.
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
- Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP
- Compatible with Fox coil shocks with required spring clip adaptor

$32.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Factor Hanger #RD-H2 - For rim brake frames with QR wheels - Attaches to frame with (2) M3x8 flat head screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish

$14.00
Shims for fitting 26.0mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 26.0mm - Length: 44mm - Machined Aluminum - Anodized Black

$244.99
The Supersonic bracket (previously know as the J5) is the first and premier model of the new generation Profile Design brackets. It offers easier adjustments and a greater fit range than anything that came before it.
Pairing this bracket with the ergo armrest offers industry-leading fit options and greater comfort.
With the 35c extensions, this aerobar is suited to riders who wish to adopt an aerodynamic arrowhead hand position.
Performance
- The Supersonic/Ergo platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments.
Fit Data
- Armrest Offset: -85mm to -17.5mm in 7.5mm steps
- Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm)
- Armrest Stack: 58.5mm (no riser kit) to 138.5mm in 5mm increments (With aftermarket Riser Kit)
- There are 80 distinct position options achievable just by moving the armrests. Combine that with risers and this bar offers 1440 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily.
Origin
The supersonic was the first of our generation brackets - resulting from careful analysis of the way riders use their aerobars and the adjustments that need to be made.
The Ergo armrest is an integral part of the overall adjustability scheme. The dual-offset design (shared with Race and Boom armrest) gives the most precise adjustment range of any armrest on the market. This, along with the evenly curved shape, allows it to work well for the majority of riders.
Extensions
- Extension Shape: The 35c extensions offer a 35 deg ski bend shape. This facilitates a slightly turned-down wrist position to create a streamlined hand position. They are 400mm long and can be cut to size to suit nearly ever rider. They are drilled for rear-exit cable routing.
- Bracket: Supersonic
- Clamp Diameter: 31.8mm (26.0 w/Shims)
- Armrest: Ergo / 10mm Pads
- Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm)
- Armrest Offset: -85mm to -17.5mm in 7.5mm steps
- Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers which add up to 138.5mm stack with (70mm of spacers added)

$166.99
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 45/25c is a 45° / 25° bend in aluminum.
Performance
- The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance.
Fit Data
- The 45/25c extensions have a first section at 45° and the grip at 25°. The rider can choose whether to hold high for the shrugged position or low for a more open, head up position.
- The 45/25a offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch.
Origin
- Recent trends in aerobar fit have been towards higher hand positions, so we've increased the rise compared to previous generation extensions. We have focused on the most popular angles from our previous range and added the 45/25c as a multi position option.
Tech Guide
- All the extensions have a 22.2mm diameter in the clamping area.
- They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes.
Who is it for?
- The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips.
- Length: 400mm
- Outer Diameter: 22.2mm
- Construction: Carbon
- Weight: 242g/pair

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances.
- CNC machined 6061 aluminum
- Black anodized finish
- Attaches to frame with (1) M4x20 Flat Head Screw
- For use with Shimano Direct Mount derailleur
Compatibility:
- Donnelly C//C (w/ Shimano Direct Mount RD) - All
- Donnelly G//C (w/ Shimano Direct Mount RD) - All
- Kestrel TERX (w/ Shimano Direct Mount RD) - 2018+
- Kestrel TERX (w/ Shimano Direct Mount RD) - 2019-2020

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances.
- CNC machined 6061 aluminum
- Black anodized finish
- Attaches to frame with (2) M4x8 Flat Head Screw
- Fasteners Included
- Holes in hanger are threaded!
- Replaces Cube Part #10106, 10107, 10131 (short road hanger with long slot)

$147.99
It’s tough to find space for a remote that looks good and lets the rider maintain full control. Enter TwistLoc: Twist to lock, push the button to unlock. It controls forks, rear shocks, or both simultaneously. With a consistent grip size and light-touch action, TwistLoc maximizes efficiency while keeping your hands safely on the bar.
Features
- Easy action: Twist to lock, push button to release
- Curved "CRVD" and straight "STRT" cable options
- Perfect for XC, Trail, and Enduro usage
- Fixed grips included

$54.99
Inner Seal Head Assembly for servicing A1 and A2 generation Reverb and Reverb Stealth dropper seatposts.
- Seals the upper tube from the inner shaft as it cycles
- Fits A1 (2010-2012) and A2 (2013-2016) generation Stealth seatposts
- A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle
- A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle
- New as of 06/14

$29.99
Remote-mounted Return Speed Adjuster rebuild kit for A2 generation Reverb and Reverb Stealth Posts.
- Barbs, O-Rings, and Return Speed Adjuster
- For "A2" designated posts, 2013-2016
- A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle

$48.99
RockShox Reverb Internals include seal head with bushings, O-rings, wiper seal, retaining ring
Page 1 of 27
Next page