Skip to main content

Shop Online, by Email, by Phone or in Store  •  Curbside Pickup Available

Click Here To Email

Filter By:

  • Show More Brands

  • Show Fewer Brands

Bottom Brackets

CeramicSpeed ITA Bottom Bracket for SRAM DUB Road
$428.99 - $459.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The ITA for SRAM DUB Road comes in two bearing options. The first option is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second option is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: Italian BB - Opening diameter: Threaded - Shell width: 70mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacer tube
Shimano UN55 Square Taper English Threaded Bottom Bracket
$27.99
Shimano's BB-UN55 Square Spindle Bottom Brackets are the unofficial standard for English-threaded cartridge bottom brackets. Quality, value, and durability come together to keep you cranking for many, many miles. - Fits JIS Square-Taper Cranksets - Hollow spindle - Crankarm fixing bolts not included
Wheels Manufacturing Inc. BB30 Outboard ABEC-3 BB
$147.99 - $151.99
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 130g
SRAM DUB PF30 Bottom Bracket
$61.99
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
TruVativ Giga Pipe Team DH Bottom Bracket
$45.99 - $63.99
Downhillers and freeriders need tough gear that can handle the abuse of big air and huge drops. TruVativ's Giga Pipe Team DH Bottom Bracket uses four sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.
SRAM DUB BB86 Bottom Bracket
$64.99
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
TruVativ Giga Pipe Team SL Bottom Bracket
$38.50 - $61.99
Striking the balance between light weight, long life and durability, TruVativ's Giga Pipe Team SL Bottom Bracket uses 3 sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.
SRAM DUB Wide BB30A Bottom Bracket
$67.99
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Designed for use with SRAM Wide Cranksets - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
SRAM DUB BB386 Bottom Bracket
$67.99
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
SRAM DUB Wide PF30 Bottom Bracket
$61.99 - $67.99
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Designed for use with SRAM Wide Cranksets - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
Sugino CBBF-103 Bottom Bracket
$47.99
- Standard JIS square taper with steel cups, retainers, lockrings, CrMo spindle, shield included - Formerly called CBB-ST, renamed CBBF
Campagnolo Ultra-Torque Bottom Bracket Adapters
$45.99
- Adapters press directly into specific PF30, BB30, BB86 or BBright frames and allow the use of standard Ultra-Torque (UT) crank sets and EPS components - Updated design increases surface area contact with the frame's bottom bracket, reducing the possibility of noise from frames with slight imperfections - Ultra-Torque OS Fit BB-cup tool is required for adapter installation
Wheels Manufacturing Inc. BB30 Outboard Zerø Ceramic Bottom Bracket
$249.53
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ZERØ Ceramic - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 122g
Campagnolo Centaur Cartridge Bottom Bracket
$80.99 - $87.99
Features three sealed cartridge bearings. - Fits Daytona, Racing Triple, Centaur, Veloce and Mirage, 1193 and later Athena and pre-1995 Record and Chorus - 115mm spindle recommended for triple cranks and 32 or 35mm seat tubes - Unique taper is not compatible with Shimano - Weight: 233 grams
Easton Bottom Bracket
$59.99
Tech specs: - BSA: 91g - PF30: 117g - BB86: 66g - BB386: 103g
Wheels Manufacturing Inc. PF86/92 Bottom Bracket for 29mm SRAM DUB Spindles
$277.99
Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 29mm spindle (SRAM DUB) cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Crankset spindle length must be longer than 104mm when used in a 86.5mm wide BB shell. - Bearings: Enduro Dual-Row ABEC-3 - Color: Silver - Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132 - Bottom Bracket Shell Width: 86.5mm - 132mm - Bottom Bracket Shell I.D.: 41mm - Flange OD: 42mm - Crank Spindle Diameter: 29mm (DUB) - Over Bearing Width: 92mm in 86.5mm wide shell (Dimensions include supplied silicone dust shields) - Weight: 90g Complete kit for one frame includes: - (2) Enduro BB86 to 30MM Dual-Row ABEC-3 Bearing - (2) 0.5mm crank spacer - (2) 1.0mm crank spacer - (2) 5.0mm crank spacer - (2) Dust seals
Wheels Manufacturing Inc. T47 Angular Contact Bottom Bracket for 24mm (Shimano) Spindles
$188.99
T47 threaded BB cups for running 24mm spindle (Shimano, etc.) cranks in T47 frames. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68mm – 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.7mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 48.5mm x 16-notch
Surly O.D. Enduro Bottom Bracket
$70.00 - $130.00
Surly OD Bottom Brackets - Compatible with 24mm spindles - Moonlander BB fits a 100mm bottom bracket shell, but exterior width conforms to BB121 standard
Wheels Manufacturing Inc. PF30 Outboard Angular Contact Bottom Bracket for 30mm Cranks
$166.99
By popular demand, Wheels Mfg. added this PF30 Outboard Bearing BB for use with 30mm spindle cranksets when used in PF30 frames. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life and simplifying maintenance. This means smooth operation, fast bearing replacement, and no more creaking. Note: Spindle length must be 103mm or longer when used in a 68mm wide shell; 108mm or longer when used in a 73mm wide shell. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width: 61mm – 83mm (Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers, sold separately) - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 89mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Crank Spindle Diameter: 30mm - Tool Pattern: 48.5mm x 16 notch - Weight: 151g
Wheels Manufacturing Inc. PF30A Outboard Angular Contact Bottom Bracket for 24mm Shimano Spindles
$189.99
Specifically designed for installing 24.00mm spindle diameter cranks (Shimano, Etc.) in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: Cannondale PF30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch Note: FSA MegaExo spindles can be between 24.00mm and 24.07mm in diameter. If your FSA spindle is 24.07mm, this BB will not work! Please purchase Wheels Mfg. FSA 24.07x37 ceramic hybrid bearings separately
Wheels Manufacturing Inc. Eccentric BB For BB30 & 24mm (Shimano) Cranks
$205.99
Convert your BB30 frame to a single-speed setup with our simple to use bottom bracket. Enduro Angular Contact sealed bearings. Double lip seals on all bearings with high fill rate top quality grease for maximum durability. Machined aluminum cups are superior in function and durability to plastic. Fully serviceable. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Chain Adjustment: 12mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 172g IMPORTANT NOTES: - Our Eccentric bottom brackets for BB30 frames will not work with frames that do not have removable c-clips in the shell. If your frame has a shell with a molded step that the bearings press up against, our EBB will not completely fit in to the shell. - 73mm BB shells require the use of M6 x 80 bolts only. Do not use M6 x 75 bolts in 73mm BB shell, damage to drive side cup threads may occur.
Wheels Manufacturing Inc. Pressfit 41mm ABEC-3 Fat Bike Bottom Bracket
$118.65 - $125.99
BB86 threaded BB for Fat Bike PF41. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF41 - BB121, PF41 - BB132 - Bottom Bracket Shell Width (mm): 121mm - 132mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: SRAM / Truvativ GXP - Crank Spindle Diameter: 22/24mm - Weight: 120g
Campagnolo Chorus Cartridge Bottom Bracket
$131.99
Compatible only with Record or Chorus square taper cranks. Features three cartridge bearings and a chromoly steel spindle. - 3 sealed cartridge bearings, 2 on the drive side, 1 on the non-drive side - Removable cups are machined from 7000 series aluminum - Unique taper is not compatible with Shimano - Weight: 220 grams
WeThePeople Compact Mid Bottom Bracket
$23.99 - $25.99
WeThePeople's Compact Mid Bottom Bracket uses high-quality precision sealed bearings for use with Mid-size bottom bracket shells. It includes their own 6061 alloy tube spacer and comes with a selection of spacers to help you dial in your drivetrain.
FSA BB30/PF30 to English Thread Bottom Bracket Adapter
$39.99 - $45.99
Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame. - Aluminum - Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame - Install with headset press (not included) and green Loctite (included)
Wheels Manufacturing Inc. Eccentric BB For PF30 & 24/22mm (SRAM, Truvativ) Cranks
$199.99
Convert your PF30 frame to a single-speed setup with our simple to use bottom bracket. Enduro Angular Contact sealed bearings. Double lip seals on all bearings with high fill rate top quality grease for maximum durability. Machined aluminum cups are superior in function and durability to plastic. Fully serviceable. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Chain Adjustment: 12mm - Crank Spindle Type: GXP (SRAM, Truvativ, etc.) - Crank Spindle Diameter: 22/24mm - Weight: 194g
Wheels Manufacturing Inc. PF30 Outboard Zerø Ceramic Bottom Bracket
$249.53
The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ZERØ Ceramic - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 156g
Wheels Manufacturing Inc. Threaded To 30mm ABEC-3 Bottom Bracket
$124.99
Wheels Mfg solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Notes: - For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm. - Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH! - Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide - Crank Spindle Diameter: 30mm - Crank Spindle Length: At least 104mm - Weight: 102g
Shimano Dura-Ace Track Cartridge Bottom Bracket
$87.99
Shimano's Dura-Ace Track Bottom Bracket features smooth-spinning, low-drag bearings for maximum power on the track. The Octalink spindle provides a stiff, high-efficiency platform for your next effort at the Hour Record.
Shimano BB-5500 Octalink V1 105 Bottom Bracket
$63.99
Compared to the power transfer of the conventional square taper spindle, the 8-splined OCTALINK interface that connects the bottom bracket and crankset increases the strength and rigidity for the entire assembly.
Page 1 of 7 Next page