$99.99 - $110.99
New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do. They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability. Front hub specs: - Weight: 198g - Torque Spec: 33nm (25ft lbs.) - Non-Drive Side Center to Flange: 34mm - Drive Side Center to Flange: 34mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm Rear hub specs: - Weight: 234g - Torque Spec: 33nm (25ft.lbs.) - Non-Drive Side Center to Flange: 29mm - Drive Side Center to Flange: 29mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm
$99.99 - $117.99
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
Shimano's Tiagra Rear Freehub is the durable, lightweight heart of a fast, everyday rear wheel. Super-polished cups and cones house ultra-smooth stainless steel bearings for minimal rolling resistance, and the hub's oversize aluminum shell boosts wheel stiffness and responsiveness. Adding to that, Shimano's labyrinth seals shut out dust, dirt, and water for phenomenal durability.
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
SRAM's 506 hub borrows technology from its more expensive brethren to bring you a solid hub at a great price. An aluminum hubshell with hi/lo flanges provide no-nonsense durability and even spoke tension. Dependable cup and cone bearings with polished races roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure.
$489.99 - $521.99
Ready for everything from XC racing to enduro charging, the DT Swiss 240s Straightpull Center Lock hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals.
SRAM's Predictive Steering Hub is a dedicated hub interface for the inverted RockShox RS-1 fork. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the oversize, solid-aluminum Torque Tube axle delivers extreme strength and stiffness. It's equipped with standard 6-bolt rotor mounts and is not convertible to other axles.
Shimano's Dura-Ace Track Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed.
$45.99 - $56.99
Designed with today’s taller, double-digit cog stacks in mind, Chris King's R45 cassette lock rings feature longer threads to provide secure engagement with the hub driveshell. A Chris King cassette lock ring is the perfect complement to any Chris King hub, or for anyone looking to add a dash of King performance to other manufacturer’s compatible rear hubs. They are available for both 11 and 12 tooth small cogs, as well as Shimano or Campagnolo hubs.
• Center to Flange: 34 R , 21.75 L • Color: Gray • Defined Color: Gray • Flange Diameter: 44 R , 44 L • Front Axle: QR x 100mm • Hub Center to Flange (mm): 34 mm , 21.5 mm • Hub Drilling: 28 • Hub/Brake Compatibility: Center-Lock Disc • Spoke Interface: J-bend
Shimano's ZEE Front Hub starts you off on the right foot when building a stout DH-worthy wheel. It uses a 20mm through-axle and Shimano's Center Lock rotor mount. Aggressive riding punishes lesser gear, so the ZEE hub sports sealed, adjustable angular-contact bearings for season after season durability.
• Super polished Bearing Races • Spoke Holes: 36/32/28H • Model Number: HB-7710-R • Series: DURA-ACE • Over Locknut: 120mm • Axle Type: 164mm • Stainless Steel Ball Bearings: stainless steel • Contact Sealing: Dust Cap • Spoke Holes: 28/32/36 • Spoke Hole Circle: 44mm • Hub Shell: aluminum • Center to Flange (Right): 32.25mm (singe) / 33.5mm (double) • Center to Flange (Left): 34.75mm (single) / 33.5mm (double) • Average Weight w/o QR: 298g (w/o lockring)
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, crazy light (60 flipping grams!) and very reasonably priced. Rim brake hubs include quick release end caps and skewer. On all models we spec high-quality made in Japan stainless-steel sealed bearings. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 60g - Non-Drive Side Center to Flange 32mm - Drive Side Center to Flange 32mm - Non-Drive Side Flange Diameter 30mm - Drive Side Flange Diameter 30mm
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. The splined freehubs have 28 points of engagement, the XD driver has 56. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 277g - Includes 12mm thru-axle end caps and quick release skewer - Drive Side Center To Flange 18.5mm - Non-Drive Center to Flange 34mm - Non-Drive Flange Diameter 58mm - Drive Side Flange Diameter 49mm
The FX front hub was designed from the ground up, with modern street in mind. Thicker angled hub flanges optimize the spoke line, creating a stiff wheelset that is protected from grinds with the included Cinema CF nylon hub guards. The recessed bearings remove any chance of bearing seat stretch and ensure the hub continues to roll smooth. A 15mm Chromoly inner axle provides plenty of strength for all the grinds you can throw at it. - Axle: 15mm Hollow Chromoly Center Axle - Bolts: Chromoly 3/8" (17mm Socket / 6mm Allen) - Shell: 6061-T6 Aluminum 36-Hole - Bearings: 2 x 6902 Sealed Bearings - Cones: 7075-T6 Aluminum Push-On Cones - Guards: Cinema CF Hub Guards - Weight: 11.9oz
Refined and re-refined, the VX3 cassette hub packs in all the features and durability you want and need in a hub. The design has been updated to a more resilient floating axle system, with the tried and true 14mm heat-treated Chromoly male axle. The SDS driver system also allows you to easily switch between left or right-side drive without any additional parts. Ceramic bushings found inside the 9t driver unit eliminate any blown-out bearings, and spin directly on the axle creating room for increased axle thickness. Finally, the included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box. - Axle: 14mm Heat-Treated Chromoly - Axle Nuts: 17mm 7075-T6 Aluminum - Shell: 6061-T6 Aluminum 36-hole - Hub Bearings: 2 x 6902 - Driver Bearings: Ceramic Bushing - Driver: 9-Tooth - Drive Side: RHD / LHD Switchable (SDS) - Cones: Thread-On - Guards: Includes DR Rear Hub Guard and CR Rear Hub Guard - Weight: 19.6oz (w/ Guards Installed)
The updated team favorite, FX2 freecoaster hub. Featuring proven KHE based internals, a 9T dual-sealed bearing driver with additional bushing, and a super-strong heat-treated Chromoly 14mm axle with 6mm internal hex for easier maintenance. Updated with the DTC system, changing drive side only requires a driver change instead of a whole hub replacement. Slack can be adjusted from 55 degrees up to 180 degrees depending on your preference, and ships with 156 degrees slack as standard. The included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box. - Axle: 14mm Hollow Heat-Treated Chromoly - Axle Nuts: 17mm Chromoly - Shell: 6061-T6 Aluminum 36-hole - Bearings: 1 x 6002, 1 x 7905, 2 x 6902 + Bushing - Clutch: DTC (Dual Threaded Clutch) - Cones: Threaded Drive Side and Non-Drive Side - Guards: Compatible with Cinema DR and CR hub guards - Slack: Includes 3 Slack Washer For Fine Tuning - Weight: 25.3oz (w/ Guards Installed)
The Mission Deploy hub gives you a chance to upgrade to a freecoaster without breaking the bank. With sealed bearings throughout, adjustable slack, heat-treated chromoly axle, and left- and right-hand-drive options, the Deploy hub has you covered. - Hub shell: 6061-T6 aluminum 36-hole - Axle: Heat-treated chromoly - Nuts: 17mm steel - Bearings: 4 sealed cartridges - Weight: 22.0oz
Track stars and fixed-gear converts love Surly's Ultra New Track Rear Hub! This gorgeous hunk of aluminum boasts reliable sealed bearings, and your choice of fixed/fixed or fixed/free gearing. Plus, this hub's 120mm width fits most track frames and the flex-free solid axle is forged from rugged chromoly.
$269.99 - $322.99
DT's 350 MTB rear hub offers top-end performance for all your riding needs. DT Swiss' Ratchet freewheel system provides precise engagement, high load capacity, and reliability. The Ratchet System driver is extremely durable and can be easily serviced—without tools—in minutes thanks to it's press fit assembly. The press fit assembly also allows the hub to work with a wide array of axle configurations; by simply swapping out the tool-free end caps (sold separately), you'll be able to enjoy the legendary DT Swiss quality on almost any bike. • Accepts 6-bolt rotors
Everything about Chris King’s ISO rear hub means business. From the extra-large hub shell and wide-radius spoke flange, to their own in-house ball bearings and lightning fast engagement. The ISO rear hub might just be the last hub you ever own. The 142 x 12mm axle adds rear end stiffness and efficiency, and these hubs are compatible with 135mm-wide, 10mm, and 12mm replacement axles (sold separately).
Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.
$451.00 - $579.99
When we set out to design our R45 hub we had over 30 years of bearing experience and 20 years of building hubs under our belts. The R45 is the culmination of that experience; we focused on creating a lightweight road racing hub that utilized hallmarks of Chris King components: precision, performance, and quality. Our R45 rear hub combines a redesigned RingDrive system with 45 teeth for lower drag and near instant engagement with a lightweight hub body and our legendary made-in-house bearings. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. The patented Chris King RingDrive with 45-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
$56.99 - $59.99
Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface
$272.99 - $277.99
The DT Swiss 240s road hub hits the sweet spot between light weight and reliability. On the winning end of countless Grand Tour stages and local races alike, these hubs will roll for thousands of nearly frictionless miles.
$279.99 - $300.99
The DT Swiss 240s MTB Center Lock Front Hub hits the sweet spot between low weight and reliability. With multiple axle options and 6-bolt rotor adapters for the Center Lock spline, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.
$78.99 - $88.99
Shimano's ZEE Rear Freehub is a quick engaging, smooth-running hub that doesn't drain the bank account. It features quality sealing, adjustable angular-contact bearings, and rotates on an extra-stiff one-piece rear axle with integrated cone construction. It's Center Lock compatible and is available in 135, 142 and 150mm configurations.
Build yourself a tough, no-nonsense rear wheel with Shimano's Deore Rear Hub. It features a quality cold-forged-aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's excellent double contact sealing to seal out dirt and water. The freehub boasts quick engagement for lightning fast acceleration and confidence when negotiating tricky technical sections. A quick-release skewer makes wheel installation and removal a breeze.
Hope XD-11 Freehub Bodies · For XD 11-speed cassette · For Hope Pro 2 EVO hubs · Contains drive side end cap, bearings and driver
$470.99 - $489.99
The DT Swiss 240s 6-Bolt Rear Hub hits the sweet spot between low weight and reliability. With multiple axle options, you can build up a high-end wheel for nearly any bike. DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.
Page 1 of 5 Next page