Headlights

Garmin Varia UT800 Meet the smart headlight that shines brighter for longer - High-intensity cycling headlight for urban and trail use that’s visible in daylight from more than 1 mile (1.6km) away - Projects a steady blast of 800 lumens for up to 1.5 hours - Automatically adjusts to ambient light conditions, speed and ride profile to extend battery life - Works independently or pairs with compatible Edge cycling computers to automatically turn lights on or off, control brightness and more - Offers 5 light modes, including high, medium, low, night flash and day flash Specs: - Dimensions (LxWxH): 3.8" x 1.3" x 1.2" (96.6mm x 33.5mm x 29.7mm); 1.8" with flange (44.7mm with flange) - Weight: 4.6oz (130.0g) - Battery life: 1.5 hours, high; 3.0 hours, medium; 6.0 hours, low; 25.0 hours, day flash; 6.0 hours, night flash - Lumens: 800 - CREE LED: yes - Degrees of visibility: 270 degrees - Visibility distance: 1 mile (1.6km) - Water rating: IPX7

- 35 lumen LED - Built-in Li-Ion USB rechargeable battery - 2 ~ 7 hour run time per charge - Low battery, charging, and fully charged indicator - Includes USB charging cable - 3 modes (2 Steady and 1 Flashing) - Multi-fit rubber strap - Water resistant

Engineered to be seen day and night, the incredible sleek Hotrod™ Front 110 emits a powerful 110 lumens of wide beam brilliance. Its continuous array of white LEDs penetrate broad daylight and the dark roads at night with powerful flashes and an extra-wide radiant glow. Every bit the road cyclist’s light, it uses a low-profile flexible mount designed for most handlebars including aerobars. - Powerful 110 lumen white light with 6 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (High - Low - SteadyPulse® - Low Flash - DayLightning® - Zoom) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - Continuous array of LEDs work in unison to illuminate an extra-wide and powerful glow - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Ultra low profile, water-resistant design only weighs 29 grams - Versatite™ flexible mount conveniently attaches to most handlebars including aero bars RUN TIMES: - Low Steady: 100 hrs - High Steady: 1:30 hrs - Low Flash: 30 hrs - DayLightning®: 3:30 hrs - SteadyPulse®: 6 hrs - Zoom: 6 hrs - CHARGE TIME: 3 hrs - MOUNTING: Flexible mount for seat post/seat stay - BATTERY: Built-in Li-ion - SYSTEM WEIGHT: 29g *Features and specs are subject to change without notice.

The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 300 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 300 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable

Blackburn's minimalist Click front light is incredibly visible to drivers, yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 18 lumens of beautiful, bright light that is even visible from the side of your bike for cross traffic. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar or bike frame. Two CR2032 coin cell batteries are included and are super-easy to replace. - 20 lumen front light - Versatile silicone mounting system - Waterproof to IP-65 standard

Packed with more power and technology than meets the eye, the new Dice™ HL 150 fires up the night with an incredible 150 lumens, and stands out in broad daylight with its intense lightning-like flashes. It even senses day and night, automatically switching to the optimal flash mode. Engineered for road cyclists, it uses a low-profile, flexible mount that's designed for most handlebars including aero bars. (Patent Pending) - Powerful 150 lumen output with 8 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® Low - SteadyPulse® High - DayLightning® Triple Flash - DayLightning® Single Flash) - DayLightning® mode emits powerful lightning-like flashes to highlight your presence in broad daylight - SteadyPulse® mode alerts nighttime motorists with pulses while constantly lighting your path - Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Low profile, water-resistant design only weighs 30 grams - Flexible mount conveniently attaches to most handlebars including aero bars Patent pending. *Features and specs are subject to change without notice.

Highly advanced StvZO-certified e-bike cycling front light delivering 550 lumens of output. The E-Bike Fusion StVZO E550 is housed in a CNC-Machined and Bead-Blasted Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and our e-bike center mount are included. E-Bike compatibility: 10.5 – 13.5V input, Max 9W. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you.

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side "gills" that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. - Side lights - Economical, high output light - Super bright flash setting ideal for daylight use - Easy operation battery operated (comes with 2 x AA) - 3 light settings – High, Low and Flash - Lumen Output: 200 - Run Time: 15:00 – 60:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 200 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

Super bright and compact, Cateye's Omni 3 Front Safety Light uses CatEye's Omni Directional Technology for increased visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and extend the run time. Plus, CatEye's tool-free FlexTight mount makes installation easy.

Cut through the darkness with the newly designed Metro Plus™ 650. Sporting a refined, aggressive look, it emits a powerful 650 lumens on the road and trails providing long-range, extra-wide coverage to maximize your line of sight. Not only limited to night, the Metro Plus' DayLightning® mode makes you stand out in broad daylight to give you the advantage anytime and anywhere you ride. - Powerful 650 lumen output with 8 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (High - Medium - Low - SteadyPulse® - DayLightning® - Triple Flash - Zoom - Walking) - SteadyPulse® mode alerts nighttime motorists with pulses while constantly lighting your path - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam - USB rechargeable Li-ion battery - Low battery indicator - Light activation lockout prevents accidental light activation - Light mode memory saves the mode you're in before the light is turned off - Rugged, water-resistant design only weighs 140 grams - Side illumination ports highlight your presence to nearby motorists - 2nd generation Locktite™ quick-release handlebar mount securely clamps to 22mm to 32mm diameter handlebars RUN TIMES: - Low: 6:30 hrs - Medium: 3 hrs - High: 1:30 hrs - Zoom: 4 hrs - SteadyPulse®: 4 hrs - DayLightning®: 12 hrs - Triple Flash: 19 hrs - Walking: 100 hrs - CHARGE TIME: 5 hrs - MOUNTING: Handlebar - BATTERY: Built-in Li-ion - SYSTEM WEIGHT: 140g *Features and specs are subject to change without notice.

The Vya Pro Headlight give commuters innovative day/night visibility in a platform that be installed/removed from the bike in seconds. Sensing ambient light, the smart headlight knows to pulse in the daytime but remain steady at night – automatically adjusting to the safest riding mode possible. Auto-on/off sensors – like all Vya lights – automatically activate the light when the ride is started and turns itself off after the ride, with a delay built in for stoplights. The simple convenience is a feature riders love, eliminating the need to turn on/off lights. A scientifically designed SafePulse beam pattern for daytime riding not only gets noticed from motorists, but allows the driver to accurately judge distance from the rider and their direction of travel – a safety feature not possible with strobing lights. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and efficient. The next evolution in bike lighting, Vya Smart Lights are unmatched for their ultra-compact engineering and effortless safety. Features - 200 Lumen Output (250 in Daytime SafePulse mode)  certified to the FL-1 Standard with high powered premium CREE LED - Ambient light sensors detects automatically adjust mode based on the most safe beam pattern for riding: SafePulse in the daytime and steady at night - Smart technology senses motion and automatically turns Vya on when inserted into mount and will remain on, even when a rider pauses at stoplights - Auto-off when bike is parked or light is removed from mount to prevent the dreaded ‘dead bike light’ when it comes time for the next ride - SafePulse beam pattern scientifically designed to enhance a driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Horizontal design with custom optic gives a powerful, concentrated burst of light to be recognizable over 2KM away in daylight - 6 hour runtime during the day (SafePulse) and 2 hours at night (solid mode) ideal for day/night commuting - Versatile mounting design can be secured to a range of handlebars, optional GoPro mount interface for unlimited mounting options - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; light will not turn on when removed from mount - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Specifications - Lumens: 200 (high), 250 (SafePulse) - Runtime: 120 min (high), 360 min (SafePulse) - Beam Angle: 20° (flood) - Charge Time: 120 min

Put it on your handlebars, put it on your fork leg, put it anywhere, Sunlite's Griplite goes everywhere. This powerful little light has 4 LEDs and runs for 60 hours! It has steady and flashing modes and is housed in a water-resistant body.

Others out on the roads and paths will see you when Sunlite's HL-L380 Headlight is on your bike. It sports 3 bright Nichia LEDs, steady and flashing modes, and 200 hours of run time! A quick-release handlebar mount is included, too.

- 80-lumen COB chip LED headlight - Powered by 2 AAA batteries (included) - Can be installed horizontally or vertically - IPX3 water-resistant rating

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultrahigh-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make/model/battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. Disclaimer: Direct X-Lock Mounting System Not compatible with all stems. Please see installation manual for stem compatibility. - 500 Lumens - Includes aluminum CNC fork and E-BIKE Stem mount - Enhanced Maximum Optical Reflection (MOR) lens - E-bike compatible 12 – 48V input - 130 cm power cable included - IPX7 water resistant - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98" Motor Compatibility - Bosch: 6V, 12V - Shimano: E5000, E7000, E6100, E6110, E9000, E8000, E8080, E6002, E6012 - Yamaha: PWse - BionX - Brose Drive S (2018) - Continental: 48V Prime, 48V Revolution

200 lumen USB rechargeable light with excellent side visibility. A versatile rubber strap allows for quick and easy attachment/removal from the handlebar. - Compact rechargeable headlight (200 lm) - Easy to attach and remove, new rubber strap mount - Excellent side visibility - Low battery indicator - USB rechargeable (Micro-USB cable included) - Mode memory function - Three light modes (High / Low / Flashing) - Turns on Flashing mode with double-click of power button Run time: - High mode 200 lumens:approx 1.5hrs - Low mode 40 lumens:approx 13hrs - Flashing mode 200 lumens:approx 30hrs

- High power 50 lux LED light, more than 50,000 hours life span - Compatible with 6-12V E-bike battery - Visible from the side - Double-Lens-Tech for perfect light distribution and high efficiancy - Retro reflector can be mounted optionally - 70g

Highlight your style and light up your ride. These sweet retro-inspired lights mount right to the brake bolt and fit any of our rides drilled for a front brake! - Batteries not included (4 x AAA) - LED lamp, plastic housing, chrome finish - 3 modes: high, low, and flashing - Mounts to handlebars or front brake bolt

USB Rechargeable, super bright, compact, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - USB rechargeable - Simple,lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Mount size: ~22-32mm Modes/Run Time - Constant: 2.5 hours - Rapid flashing: 5.5 hours - Slow flashing: 6 hours

- High power 35 lux LED light, more than 50,000 hours life span - Integrated retro reflector to be better seen by oncoming traffic - Optimal light distribution by our double lens technology - Clear lens technology, you are also visible from the side - Compact, sportive design - 70g

Engineered with incredible night-piercing power, the Metro Pro™ 1100 unleashes an extraordinary 1100 lumens right through the darkness with exceptional brightness and clarity. Its cycling tuned optics enables an extra-wide, long-range output to maximize your line of sight. Not only limited to night, the Metro Pro’s DayLightning® mode makes you stand out in broad daylight to give you the advantage anytime and anywhere you ride. Patent pending. - Powerful 1100 lumen output with 9 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® - Triple Flash - Zoom - DayLightning® - Walking mode) - SteadyPulse® mode alerts nighttime motorists with pulses while constantly lighting your path - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam - Micro USB rechargeable, internal battery lasts up to 100 hours - Low battery indicator alerts you when a charge is needed - Rugged, water-resistant design - Side illumination ports highlight your presence to nearby motorists - Light activation lockout prevents accidental light activation - Locktite™ quick-release handlebar mount keeps the light securely fastened to the handlebar RUN TIMES: - Boost: 1:00 hrs - High: 1:30 hrs - Medium: 3:00 hrs - Low: 10 hrs - SteadyPulse®: 4:00 hrs - DayLightning®: 14 hrs - Triple Flash: 22 hrs - Zoom: 4:00 hrs - Walking: 100 hrs - CHARGE TIME: 2:30 hrs (depending on charger used) - MOUNTING: Handlebar - BATTERY: Built-in Li-ion Patent pending. *Features and specs are subject to change without notice.

Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.

The E-Bike Orbis StVZO E600 is an advanced StVZO certified e-bike cycling front light delivering 600 lumens of output. This light is housed in a die-cast and CNC-Machined Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The Orbis StVZO E600 offers Daytime Running Light mode as well as an intelligent 'Thermal Protection Safety Feature' which automatically reduces light output for safety and efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and CNC Machined Aluminum E-bike Mega Mount are included. E-Bike compatibility: 10.5 – 13.5V input, 8.5W Low Beam / 13W Daytime Running Lights. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 600 lumens - StVZO-Optimized lens - Daytime running lights (ECE R87) - Die cast and CNC-machined aluminum body with optimized heat-dissipating design - Includes CNC Machined Aluminum E-bike Mega Mount - Thermal Protection Safety Feature: Auto-reduces light output for safety and efficiency - Rigorously tested to IPX7 Waterproofing standards - E-bike compatible 10.5 – 13.5V input, 8.5W LB / 13W DRL - Versatile E-bike system compatibility - 130cm power cable with BES3 BOSCH connector included

The rebirth of an iconic bicycle light, the Frog Front Bike Light: bright, versatile & fun. A design that millions of riders around the world have come to love. Powerful enough for everyday commuting or used to complement an existing lighting set-up. Taking cues from Knog’s more advanced lights, Frog is designed with Chip on Board LED technology, enabling a high intensity light that's compact, low profile and packed with features. - Punchy 40 lumen output - Integrated flexible mounting system - 9 eye-catching modes - Water resistant with IP65 rating - Super lightweight at just 20 grams - USB-C rechargeable (cable not included) - Curved lens provides side illumination - Battery level indicator - Up to 80 hour runtime - Simple one-button operation - Available in 6 fun-loving colours

- High-quality PREMIUM design - AWARD-WINNING light distribution technology - Easy-to-use LCD DISPLAY shows various information to the user - Extensive side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 80 LUX - 6 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 3 hrs

- Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 26 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Side Illumination ports allow cyclists to be seen when riding across traffic lanes

The Portland Design Works Daybot Tail Light has a CREE LED to power a 100 lumen Daytime Pulse mode for increased visibility on sunny days. Switch from Day Modes to Night Modes to conserve battery power. Hold the power button down for 1 second to turn the light on or off. The Daybot Tail Light has redesigned mount that works with the included seatpost and seatstay brackets. - 2 Day Modes (runtime): Solid - 60 lumens (6 hours), Pulse - 100 lumens (20 hours) - 3 Night Modes (runtime): Solid - 20 lumens (20 hours), Flash - 20 lumens (100 hours), Pulse - 20 lumens (30 hours) - USB rechargeable li-polymer battery - Weatherproof exterior for all season riding - Includes brackets for seatpost and seatstay mounting - Mounts vertically or horizontally - Includes Micro USB recharging cord - Weight: 1.9 oz - Lifetime Warranty

Safety first, the AMPP400 comes with maximum side visibility, securely held in place with our adjustable FlexTight bracket. FEATURES: - High power rechargeable headlight (400 lm) - Powerful wide beam with OptiCube lens technology - Excellent side cut outs for enhanced side visibility - Large-capacity lithium-ion rechargeable battery - Battery indicator mode flashes red when less than 20% - Lightweight and compact polycarbonate body - USB rechargeable (Micro USB cable included) - Mode memory function - 4 light modes: High, Low, Daytime HyperConstant, Flashing - Secure FlexTight bracket for quick installation - Water resistant - Optional helmet mount, center fork bracket available Modes/Run time: - High mode: 400 lumens | 2.5hrs - Low mode: 200 lumens | 5hrs Dimensions/Weight: - 32 x 102 x 33 mm - Weight: 95 grams (light unit and battery) Light source: - High intensity white LED X1 Optional Parts: - Center Fork Bracket (5342440) - Helmet mount (5341831N) Recharge time: - Approximately 4-5hrs (USB2.0 recharge) - About 300 recharge times (until rated capacity drops to 70%

Compact cycling light with a machined aluminum body. A bright, single LED system provides up to 400 lumens and a Daytime Flash mode. Battery runtime has increased by 2.5 hours for up to 20 hours of runtime. It features eight output modes and cutouts for side visibility. Charging is simple with an integrated cable-free USB stick. It securely straps to a variety of handle bar shapes and sizes. Specs - Max Lumens: 400 - Weight: 83g - Max Runtime: 20 hours - Recharge Time: 2:30

Minimal and mighty! The USB rechargeable Asteroid headlight from Portland Design Works mounts in seconds and shines super brightly with high-quality optics so you can be seen. Ride for up to 24 hours before needing a new charge. - 3 Modes (burn time): Flash (24 hrs), Pulse (5 hrs), Steady (4 hrs) - UV Proof rubber mount  - Double-click lens to turn on/off - Micro USB charge cord included - Weatherproof exterior for all season riding - Weight: 73 g (2.6 oz)