Shop Ski & Snowboard Gear

The bestselling women's Burton Jet Set Jacket combines the eco-conscious warmth of recycled content ThermacoreECO insulation with a functional yet flattering slim fit for a look that pairs well with anything in your closet. Dumping snow to springtime showers are no match for the richly textured waterproof/breathable DRYRIDE two-layer fabrics, which are offered in patterns ranging from classic single-colored to standout tribal. Add in the full laundry list of hidden features, including a permanently removable waist gaiter, handy pockets, and a hidden hem cinch, and you've got a jacket that is always ready for action. - Slim fit sits close to the body, with room for the garment to move with you - DRYRIDE two-layer fabric [10,000mm/5,000g] is highly breathable, waterproof, and quick drying - Living Lining provides consistent temperature regulation without adding bulk or weight - ThermacoreECO insulation [80g] is lightweight and breathable, providing a super-comfortable feel and low-bulk warmth that cranks the heat and dries quickly. It's bluesign approved and features over 90% recycled fibers that provide long-lasting durability and all-around easy care. - Ergonomic water-repellent waist gaiter with jacket-to-pant interface; Mesh-lined, no-snag sleeve vents - Contour drop hood is helmet compatible and features front adjustment; Snag-free neckline - Zippered microfleece hand-warmer pockets, easy-access media/goggles pocket, and mesh dump pocket - bluesign approved materials use only safe chemicals and reduce impact on both humans and the planet during manufacturing

Developed on the basis of the female foot anatomy, the DS 90 W GW with the Powercage structure has a lower cuff profile and a particularly warm and soft liner. It is the perfect choice for advanced female skiers. The combination of performance, comfort, neutral stance, and flexible handling supports the wearer's natural balance and improves the feel for the skis. This results in more control and less effort. The MyFit technology makes it possible to adjust both the IF-liner and the shell. The soles with GripWalk toe and heel plates offer outstanding comfort when walking and better grip. Specifications: - Weight: 1715g / 1745g With GW - Size: LS 225-275 - Size Run: Half sizes only - Construction: Overlap - Flex: 90 - Last: 99 mm - Material: PU/PU - Liner: IF DS W - Buckle: F3 - Strap: Power Strap 40 mm - Dalbello Fit Category: Medium fit

With classic Dalbello Cabrio architecture and a new fit and flex you can live with from day #1, the Dalbello Il Moro 90 GW Ski Boots are ready for their closeup and want you along for the ride. A new 99mm fit makes this a "snug" average last, and the 90 flex makes for an ultra versatile performer that's as home off the beaten track as it is on prepared snow. - Last: 99mm – A comfortable mid-range last for most average feet. - Flex: 90 – A medium stiff flex that works well in all conditions. - 3Density Wrap Sport Liner - Cuff – Polyurethane - Shell – Polyurethane - Tongue – Polyurethane Cabrio Design – The Cabrio design is a 3 piece construction - shell/cuff/tongue – that comfortably secures the foot and lower leg while optimizing smooth and progressive flex. Dalbello’s Cabrio models provide the ultimate in responsive performance to ski your best.

The new Lupo AX HD targets the freeride-oriented customer who wants the full set of touring functions combined with a stiff, durable, high-performance shell and tongue. With its comfort-enhancing 100mm last, this model is built specifically for the local, patroller, and die-hard big-mountain skier. Utilizing the popular Krypton architecture, this boot comes with tech inserts and a removable Kinetic Response Tongue that goes on and off in an instant. With a 110 flex, the Lupo HD's shell is made from the same Polyurethane used in our race boots.

High performance, precise Contour 5 fit, super-comfortable, loaded with features: the Veloce 130 GW sets new standards in every department. And that includes impressive power transmission, ski control, and pre-fitted GripWalk soles. Because it features the latest technologies, the Veloce 130 GW with 100 mm last width combines high performance, top speed, and exceptional comfort. Its innovative overlap construction with dual injected racing PU shell and cuff, 3D Booster power strap, anodized buckles, and removable spoiler all give highly athletic piste skiers the power, control, and comfortable fit they need to deliver top performance and speed all day long. Contour 5 technology means that the shell and liner adjust to the shape of the foot in five places, eliminating pressure points. Your boot fitter can also modify the shell to your foot with minimal effort. The same applies to the sole plate, which can be used to adjust the lean angle. A tongue with an AUTOFIT memory foam cushion reduces pressure on the shin, producing a unique feel. Anatomically shaped, partial padding in the Contour 5 IF PRO 130 liner provides firm support at the heel and even pressure distribution. High-grade Primaloft in the liner and footbed, as well as welded seams, insulate these boots well, even on really cold days. The liner and shell can be adjusted separately to your foot, thanks to MyFit technology. Pre-fitted GripWalk soles make walking easier and less slippery. - SIZE: MS 245-305 - SIZE RUN: Half sizes only - CONSTRUCTION: Overlap - FLEX: 130 - LAST: 100 - MATERIAL: PU/PU - LINER: Veloce IF Pro - BUCKLE: V22 - STRAP: Buckle Power Strap - DALBELLO FIT CATEGORY: medium_fit CONTOUR 5 For the VELOCE, Dalbello has refined the proven Contour 4 technology to bring the boot's fit and comfort to a new level, with Contour 5. MY FIT My new boot. Fits. Perfectly. The My Fit boot system enables easy and quick customization both of the shell and the liner. Thanks to the pre-formed anatomical contours in the shell, each My Fit boot already comes with the best possible fit at the very first step in. Depending on the liner, the thermoforming lasts no longer than 8 minutes and the flex stays untouched to guarantee the best performance and comfort all day long! GRIPWALK The new sole-binding system for walking comfort and skiing performance, available in 90% of the Dalbello ski boots collection GripWalk contains a new co-polymer sole with a rocker profile. The convex shape and ribbed tread of the rubber add a lot of walking comfort and provide a much better grip. GripWalk soles are the perfect tuning parts designed for 90% of the Dalbello boot collection and don't require any height adjustment at GripWalk bindings. OVERLAP DESIGN 2 Piece Architecture For all those categories, in which a high level of power, precision, and control are demanded, we built the boots with the traditional overlap construction. The architecture consists of two parts - lower shell and upper cuff - and transmits the power directly to the ski and binding. The defined flex and the traditional power-rebound enable precise control and work perfectly on groomed slopes.

There are some winter days where it's way too nice outside not go out for some fun in the mountain wonder. Snowshoeing is a simple and affordable option, and the Appalaches meets your needs. This model is perfect for a stroll on easy paths; its proven sturdiness and reliability make it a snowshoe you can count on to enjoy the outdoors. With an easy to use buckle binding system, the Appalaches is ready for fun! - User Profile: Day Hiking. Snowshoes designed for winter hiking enthusiasts seeking to improve their physical condition while exploring backcountry or neighboring trails. - Snowshoe Frame: 6061-T6 aluminum anodized frame. Light and sturdy. Contour frame: Proven ergonomics for a natural stride and optimized surface area with great snow shedding capacities - Harness: Contact Trad is ratchet-based for a moccasin loose fit or tight boot cinch. - Closure System: Fasteners with ratchet buckle system: Light, practical and simple adjustment - Crampons: Crux crampons for easy grip and non-snag operation on day hike outings. - Pivot: Freeflex X pivot, 30mm in width, is the biggest and most reliable of its type in the industry. It supplies a robust yet flexible suspension. - Decking: Polymer molded deck. Light, sturdy, and resistant down to -40°C. Ribbed deck clips for traction and an ultra robust frame connection. Snowfree surface: Excellent snow shedding from deck. - Ergonomics: ErgoStream frame profile for easy walking in powder. - Warranty: Lifetime limited warranty - User weight: 150 - 250 lb / 68 - 113kg - Snowshoes weight: 5.3 lb / 2.4kg

Designed for all-mountain, all-terrain action, The Era is a new women’s-specific form of our most popular men’s helmet, the Nine. Re-engineered for flawless female fit, the low-profile design of The Era features the proven performance of In-Mold Construction, our In Form™ fit system, and Thermostat Control Adjsutable Venting. With an impressive balance between features and price, the Era offers incredible value. Optional MIPS (Multi Impact Protection System) reduces rotational forces on the brain in some angled impacts. Construction: In-Mold Fit System: Roc Loc 5 System w/ Vertical Tuning Ventilation: Thermostat Control, Super Cool Vents, Stack Ventilation Features: Compatible with all aftermarket Giro audio systems, Seamless Compatibility with all Giro goggles Certification: ASTM F2040 / CE EN1077

With its simply fun style and reliable performance, the Entity Helmet has the stamp of approval from groms and parents alike. K2's K2Dialed Fit System is easy to use and optimized for custom comfort even as your kid's noggin keeps growing – plus, the Entity's full wrap liner is easily removed and washed for season-to-season shredding. - Hard Shell Construction - Full Wrap Liner - Passive Venting - K2Dialed Fit

The Charm is K2’s stylish, comfortable, and easy to use women’s binding that’s designed to advance your personal progression. The A-Line™ chassis is backed by K2’s lifetime baseplate warranty and the comfortable Caddi™ straps make the Charm the best sidekick any woman could ask for.

The K2 Indy all-mountain snowboard binding more than holds its own against any binding on the market and over-delivers when it comes to durability, performance, and value. The mid-flexing Indy Binding is built on our tough ProFusion Chassis with seamless EVA footbeds and a built-in 3° cant to provide premium-style comfort while putting the user in a natural athletic riding position for absorbing and attacking terrain. The AT Nylon Highback features our Gap Eraser forward lean adjustment, eliminating the need for a standard lock block and allowing you to customize the level of board response: more contact equals more response. The Power Ramp easily slides in and out to perfectly match the outsole shape of your boots for quick power transfer on take-offs and control on rails. Our padded Custom Caddi 3D ankle strap is cushy and securely hugs your feet while allowing you to tweak and flex on grabs and presses. The PerfectFit toe strap features a hinge design that can be custom-shaped to any snowboard boot toe box shape. All of the ratchets on the K2 Indy Snowboard Binding feature our EZ Feed design for quick strapping in, and are made from burly aluminum that's designed to take the abuse of everyday riding. To top it off, the entire binding can be adjusted by hand and on the board thanks to our Tool-less Adjustment design philosophy. - PC ProFusion Chassis: Polycarbonate materials combine with a classic shape to deliver a lightweight and tough framework that is the go-to standard in the K2 binding collection. - AT Nylon Highback with Gap Eraser Forward Lean Adjustment: Stiff, durable, and temperature resistant nylon provide maximum responsiveness and support. Customize your forward lean without the need for tools or a traditional forward lean block. - Custom Caddi Ankle Strap: Our most padded and cushy ankle strap option, featuring ladder covers and durable polyurethane laminate materials. - Perfect Fit Toe Strap: Patented toe strap technology that uses flexible hinges and lock levers to custom fit the toe strap to any snowboard boot silhouette. - 3° Canted Footbed: 3° of inward canting in the footbed places the rider in a natural riding position. - 100% Tool-Less Adjustment: Once mounted to your board, all strap and highback adjustments can be done on the fly without the need for screwdrivers or other tools.

For the snowboarder who refuses to sacrifice comfort and performance for convenience, K2's Clicker™ X HB provides secure toe and heel mount points for an ultra-quick edge-to-edge response and natural lateral mobility for a familiar flex and feel. We've engineered a 3° cant directly into the chassis, helping to bring the knees together to place the user in a natural riding position. This makes turns feel more natural, alleviates foot pain, and takes unnecessary pressure off the knees and hips. An adjustable heel cup allows riders to dial in their stance perfectly and gives an excellent spot for holding when hiking for the softest snow around. The highback features tool-less forward lean adjustment with two pre-set angles. Settings dial in at 0° for a traditional up-right feel and 6° for those looking for extra leverage on their heelside turns. *Only compatible with K2 Clicker™ X HB snowboard boot models. **Compatible with all modern mountain systems (i.e., 4-hole and channel). Feature 1: GF Nylon Clicker™ X HB Chassis - Fiberglass-filled nylon construction that's strong and supportive regardless of temperature with an adjustable heel cup. Feature 2: GF Nylon AT Clicker™ X HB Highback - Flexible and lightweight with a rear notch for smooth entry and exit. Feature 3: 3º Canted Chassis - 3º of inward canting built directly into the chassis to place the rider in a natural riding position. Feature 4: Full Coverage EVA Footbed - Dense and cushioning EVA underfoot absorbs chatter and extends your day. Feature 5: Tool-less Forward Lean Adjustment - Choose on the fly between 0º and 7º of forward lean without the need for a screwdriver. Feature 6: 6061-T6 Aluminum Adjustable Heelcup - Single tool adjustment fits the heel cup to your exact boot size.

The K2 Kinsley women's snowboard boot may just be the perfect snowboard boot, so consider this your wake up call! It nails the sweet spot for freestyle and all-mountain snowboarders who prefer a medium flex and value comfort and fit above all else. The K2 Kinsley snowboard boot features a dual zone closure with BOA Fit System to micro-tune your fit. A dedicated BOA dial for the upper portion of the shell and a second dedicated to closing the lower portion of the shell. The upper cuff of the boot is constructed with our Flex Zone calf panel at the top of the cuff, helping to keep legs happy all day long. Inside, a supportive three-point harness is integrated into the shell, wrapping itself around a heat-moldable Control Foam 3D liner with award-winning foam from Intuition. Underfoot, our proprietary This Grips! rubber outsole provides excellent grip while hiking, boot packing, and walking across icy parking lots. It sits atop a dual density midsole that features a lightweight EVA material complemented by our Harshmellow damping material to cushion your bones and reduce fatigue after long days on the hill. - H4/M3 BOA Fit System: Impact resistant, durable, and performance driven, the H4 BOA Dial ejects on severe impact and is easily re-inserted into the boot. The H4 dial controls the upper shell lacing, while the M3 controls the lower shell lacing. - 3-Point Harness Liner Lacing: A traditional-style liner harness with a pull lace and three contact points hugs the ankle and provides additional support. - Intuition Control Foam 3D Liner: Heat-moldable medium- and high-density Intuition foam forms to the exact shape of your leg, ankle, and foot for superior fit, warmth, and comfort. - This Grips! Premium Outsole with Harshmellow: Our proprietary rubber compound delivers excellent grip and durability on all terrain types and is integrated with Harshmellow foam to dampen chatter and vibration. - Articulating Upper Cuff with HDR Premium Synthetics: Independent upper cuff articulation delivers a distortion-free flex, while HDR synthetics improve overall shell durability. - 3D Formed EVA Footbed: Dense EVA foam provides contoured cushioning and support.

For the woman that knows what she wants; comfort, performance, and convenience. The all-new Clicker X HB provides secure toe and heel metal mount points; aiding in quick edge-to-edge response. Connection points at the toe and heel allow for a familiar flex and feel, giving the rider the lateral mobility that feels comfortable out of the box. A fiberglass-filled female-specific highback provides just the right amount of support and a 3° cant on the chassis helps to put riders in the natural riding position. SECURE TOE AND HEEL MOUNT POINTS 6061-T6 Aluminum mount points provide a secure connection between the snowboard boot and binding and create ultra-fast board response, speeding up edge-to-edge transition while maintaining natural mobility while snowboarding. AT CLICKER™ X HB HIGHBACK Designed to give riders the familiar response they need to tackle the most demanding terrain, and shaped to make boot entry and exit a breeze. 3º CANTED CHASSIS Canted at 3º to match the natural leg position while snowboarding, we've integrated inward cant into the Clicker™ X HB binding to provide support to the outside of the foot for better balance, improved control and reduced foot fatigue. 6061-T6 ADJUSTABLE ALUMINUM HEELCUP Strong, stable, and micro-adjustable. An adjustable aluminum heelcup help optimize the boot-to-binding integration and minimize toe and heel drag. TOOL-LESS FORWARD LEAN ADJUSTMENT Tool-less adjustable forward lean with two pre-set positions allows you to adjust your stance on the fly.

Waste no time strapping in and get to the bottom before everyone else. The K2 Cinch TS is quick on the draw and our most premium and responsive convenience binding. This snowboard binding harnesses the tech found on our top-end premium models, coming together into a genuinely deluxe binding that's fully equipped with all the bells and whistles. Our customizable Tripod™ Chassis uses interchangeable urethane dampers (“pods”) under the binding base to fine-tune the medial and lateral flex for board response that's uniquely yours. The chassis also features a 3º cant that puts riders into the anatomically correct and balanced riding position. The sturdy and lightweight AT Nylon Highback flips down toward the snow when you're ready to slide in and locks with the pull of a lever when it's time to cruise, thanks to our time-tested Cinch™ Technology. The Bender™ 3D Ankle Strap and PerfectFit™ Toe Strap provide a secure and highly adjustable fit for sending it all over the mountain and in any snow condition. The K2 Cinch is an all-mountain binding that shatters the convenience binding mold for premium performance, ultra-quick strapping, and even quicker lapping. Feature 1: Cinch™ TriPod™ Chassis - A supportive and smooth flexing, fully hinging chassis that uses interchangeable pods on the base of the binding to customize the lateral mobility and feel to your exact liking. Feature 2: AT Nylon Highback - Stiff, durable, and temperature-resistant nylon provide maximum responsiveness and support. Customize your forward lean without the need for tools or a traditional forward lean block. Feature 3: Bender™ Ankle Strap - A low-profile, padless, and highly flexible injection-molded ankle strap built to optimize freestyle mobility. Feature 4: Perfect Fit™ Toe Strap - Patented toe strap technology uses flexible hinges and lock levers to custom fit the toe strap to any snowboard boot silhouette. Feature 5: 3º Canted Footbed - 3º of inward canting in the footbed places the rider in a natural riding position. Feature 6: Adjustable Forward Lean - Custom-fit the forward lean of the highback with the turn of a screwdriver.

The Kinsley Clicker X HB offers every convenience you could ever want, from ultra-easy binding entry and exit to a perfect out-of-the-box fit, all without sacrificing an ounce of performance. It all starts with a dual-zone closure with BOA Fit System to micro-tune your fit. A dedicated BOA dial for the upper portion of the shell and a second dedicated to closing the lower portion of the shell. The upper cuff of the boot is constructed with our Flex Zone calf panel at the top of the cuff, helping to keep legs happy all day long. Inside, a supportive three-point harness is integrated into the shell, wrapping itself around a heat moldable Control Foam 3D liner with award-winning foam from Intuition. Underfoot, we integrated the secure and strong integrated toe and heel mounts of our Clicker X technology into a full rubber outsole. This dual-compound rubber material is grippy and durable for ice traction in the parking lot and those semi-sketchy boot packs. To put the cherry on top, an impact-absorbing EVA midsole is lined with K2's SpaceHeater material to keep your foot warm and comfortable all day. - H4/M3 Zonal BOA Fit System: Impact resistant, durable, and performance-driven, the H4 BOA Dial ejects on severe impact and is easily re-inserted into the boot. The H4 dial controls the upper shell lacing, while the M3 dial controls the lower shell lacing. - 3-Point Harness Liner Lacing: A traditional-style liner harness with a pull lace and three contact points hugs the ankle and provides additional support. - Intuition Control Foam 3D Liner: Heat moldable medium- and high-density Intuition foam forms to the exact shape of your leg, ankle, and foot for superior fit, warmth, and comfort. - Clicker X Outsole: Secure and strong integrated toe and heel mounts combine with a grippy and durable rubber for natural lateral mobility and flex. - Articulating Upper Cuff with HDR Premium Synthetics: Independent upper cuff articulation delivers a distortion-free flex while HDR synthetics improve overall shell durability. - 3D Formed EVA Footbed: Dense EVA foam provides contouring cushioning and support. Specs: - SNOWBOARD BOOTS CATEGORY: Step In - SNOWBOARD FLEX: 6 - BOOT LACING: BOA Stainless Steel, H4/M3 Zonal BOA Fit System - SNOWBOARD BOOT UPPER: Articulating Cuff, HDR Premium Synthetic - BOOT LINER EXTRAS: Internal J -Bars, External J-Bars, Flex-Zone Calf Panel - BOOT FOOTBED: 3D Formed EVA - BOOT LINER CONSTRUCTION: Intuition Control Foam 3D - BOOT OUTSOLE: This Grips Premium Rubber, Harshmellow - BOOT LINER LACING: 3 Point Harness

The proven interface meets the number-one boot in snowboarding. The men's K2 Maysis Clicker X HB offers the highest level of performance paired with the ease of K2's Clicker X system. Featuring the micro-adjustability of a Boa Fit System with Coiler Technology, the Maysis offers security with the turn of a dial. We've paired that with a heat-moldable Intuition liner and K2's Conda Boa heel-retention system, giving you unrivaled control and heel hold. - H4 Boa Coiler Lacing - Rubber Reinforced Articulating Cuff Upper - Endo 2.0 Heel Counter - Intuition Control Foam 3D Liner - Conda Boa Liner Lacing - 3D Formed EVA Footbed - Clicker X Outsole

For women who prioritize comfort and ease of use above all else when it comes to their boots, we offer the BFC W 85. A low profile, fully customizable fit gives these boots the ultimate comfort -fit paired with performance-enhancing features. An easy flex rating of 85, Hands-Free Entry, a Cushfit liner, and a heat-moldable shell mean these easy-flexing boots might be more comfortable than the shoes you wore while driving to the mountain this morning. Hands Free Entry, Fully Heat Moldable, CushFit. - FLEX / FEEL: 4 - FLEX RATING: 85 - LAST: 103 - LINER: CushFit Plus - STRAP: Velcro Taper - OUTSOLE: GripWalk

The K2 Gateway combines a classic directional twin shape and a progressive Combination Camber Profile that takes on all comers and is the perfect ally for ripping down open powder fields, perfectly spaced tree runs, or your favorite line in the park. The Gateway’s aspen core provides a snappy and playful feel with a mid-flex for quick edge changes through sketchy terrain and pressing on boxes and butters. The all-mountain Gateway packs premium tech into an affordable package for leveling up your skillset on any terrain the resort has to offer.

Designed for the progressing intermediate female skiers looking to get off the groomers and into more adventurous terrain, the Mindbender 85W provides an agile, forgiving platform that excels in a variety of conditions. Oufitted with a Slantwall construction, a 30-degree angle to the sidewall in K2's Hybritech construction, The 85W is responsive while maintaining accuracy and power. Sharing the same Aspen Micro Block core and All-Terrain rocker, a gradual rise in the tip for great versatility in all conditions, with a low, short rise in the tail for added control in variable snow as some of its bigger siblings, the 85W maintains its versatility, float and control. SIZE: - 149,156,163,170 DIMENSIONS: - 128 - 85 -116 PRODUCT WEIGHT(G): - 1,550 @ 163 BEST FOR: - Freeride - All Mountain TECHNOLOGY: - ALL-TERRAIN ROCKER™: Gradual rise in the tip with a short, low section in the tail for greater versatility in all conditions. - BIO-RESIN: Lightweight, eco-friendly material for energetic and consistent flex across a wide range of temperatures. - BINDINGS NOT INSTALLED: K2 does not mount bindings prior to shipment. They must be properly set for each individual rider based on their size, ability level, and equipment. All bindings must be mounted, adjusted, and tested by an authorized retailer prior to use.

Like any good exploratory mission, don’t forget to take your Passport with you -- the key to accessing uncharted terrain. Built for the intermediate-to-expert level rider and shaped and sized to be unisex, the Passport is directional in every way but remains switch and fakie friendly. Slightly-wider-than-average waist width is met width 8mm of taper to ensure easy turning and float in deep snow. It’s complemented by an elongated rocker profile from the front insert pack, throughout the tip. A tighter sidecut radius in the tip and tail allows you to engage turns easily, while a longer radius between the feet makes the turn smooth and predictable progression. We’ve added a new blend of ICG 10™ Triax fiberglass to the Passport, adding tip-to-tail snap with precise edge performance. This glass layup wraps our lightweight A1 core - which features three species of sustainably harvested timber, and all of it sits atop a fast and durable Sintered 4000 base.

The Anthem 95 BOA® is a great introductory boot for the athletic skier looking to level up their skills. Outfitted with classic Anthem construction — a Powerlite Shell, Powerfuse Spyne and a Women’s Adjustable Cuff and all new BOA® tech, the Anthem 95 BOA® pairs responsiveness, performance and an added layer of comfort.

Featuring the same tech as its bigger siblings, but with a more nimble waist width, the Reckoner 102 is a playful tool built for whipping cork threes off cat tracks, hitting butters, and exploring all over the hill. Strapped with patented Spectral Braid construction, full sidewall, and Double Barrel core, it delivers versatility and playfulness. Its durability and pop come from its Carbon Boosted design where longitudinal carbon stringers laid on top of the core keep you hunting side hits all day long. Wherever you decide to take it, the Reckoner 102 has got your back. DIMENSIONS: - 134-102-127 PRODUCT WEIGHT(G): - 1,822 @ 177 BEST FOR: - All Mountain - Freeride TECHNOLOGY: - ALL-TERRAIN TWIN ROCKER™: All-Terrain Twin Rocker is a gradual, extended rise at the tip and tail for added versatility and control in all conditions with twin-tip skis. - ASPEN CORE: A single species of wood ensures consistency - giving riders the advantage of a proven flex, durability, and snap. - FIR CORE: Energetic, tough, dense wood that absorbs impact. - DOUBLE BARREL: The backbone of our Factory Team collection, Double Barrel cores combine a dense, Fir core over the edges for power and impact resistance, with a lighter Aspen center core for a lively energetic feel. - CARBON BOOST BRAID: Longitudinal carbon stringers woven into the K2’s patented Triaxial Braid for added pop and rebound, found on freeride and factory team skis. - TWINTECH: A durable, full sidewall construction providing great edge feel and performance with added top sheet resistant to ski vs. ski impact damage. - BINDINGS NOT INCLUDED: Ski bindings are not included or installed as part of this purchase. All bindings must be mounted, adjusted, and tested by an authorized retailer prior to use.

These delicate ornaments are Made in the USA with 100% Pewter and include a red rope for easy hanging on any tree. Collect them all, at Ken's!

Similar to the Lasso Pro but for the rider who’s looking for a little more flex in their pursuit of freestyle perfection, the Lasso comes with the H4 BOA® Coiler Fit System to ensure a strong and even hold while your foot is in the boot along with BOA® Tongue Tied™ which delivers a secure, micro-adjustable fit in the ankle and eliminates the need for a traditional harness. The Impact Rubber Cupsole with Ride Fusion Rubber uses recycled premium rubber and Eco +Slime Midsole for traction and cushioning, making the Lasso a must-have medium-stiff flexing boot that offers any rider a responsive feel with a hassle-free fit system.

Set your aspiring young skier up for fun. The Comp J1 shares the style of mom and dad's boots with a focus on comfort and warmth for little feet. A soft flex and single-buckle closure keep the focus on comfort and make for easy on and off. Junior Comfort Thermoformed liners offer all-day cushioning, comfort, and warmth.

Buckle in and ride. The Battle is an entry-level all-mountain binding that offers easy entry and secure comfort that take the struggle out of the snowboard skills progression. Our 3D-molded ladders let you dial in the right tension, while padded toe and heel pads complement our MainFrame highbacks for the power transmission, comfort and skill-building control to play in the park and rip all-mountain. Step into the Battle and get ready to throw down. Quick and Easy Entry Cast aluminum Baselight buckles offer durability and quick ratcheting for easy entry-and-exit Heelside Power MainFrame highbacks feature a rigid center frame for massive heelside power with engineered flex zones for incredible side-to-side mobility Secure, Low-Vibration Comfort Featuring two zones of compression and thermoformed EVA, Puffy Pad footbeds increase comfort and vibration absorption

Featuring a women-specific 102mm "wide" fit; the PURE 80 delivers award-winning power and precision in a customizable, boot-fitter friendly design. Sensor Blade shell technology reduces weight and drives energy directly into the ski while Flex Adjustment options allow performance to be tailored to the needs of every skier. Custom OptiSensor Thinsulate™ liners allow pin-pointed customization for supreme comfort, warmth, and support.

Explore the whole mountain. Inbounds powder stash or beyond the gates, the Alltrack 70 is designed to ski it all. A releasable cuff offers a natural range of motion for hiking, and the Generative Design Grid shell is engineered for reduced weight and full power transmission to handle all conditions. The 102mm last and custom liner offer all-day comfort for exploring the whole mountain. Regular Fit Women's-specific regular fit features a 102mm last for recreational skiing and all-day comfort Lightweight, Full Power Generative Design Grid minimizes boot wall thickness for the most effective use of material to reduce weight and enhance power transfer Better Skiability, Better Fit Dual-Core technology provides targeted power transmission and shell wrapping, resulting in livelier rebound, response, and control Optimized Hike Mode The lower boot shell is designed to offer a 50-degree range of motion in walk mode for efficient touring and maximum power for skiing when in ski mode Women's-Specific Fit The shorter, tulip-shaped cuff eliminates pressure around the shin and calf muscle for increased comfort and performance Custom Comfort and Precision Full custom liners are 100% customizable for enhanced comfort, precision and performance GRIPWALK Compatible (sold separately) GRIPWALK soles feature a rubber tread and rockered toe for a more natural walking motion and increased traction

the ALIAS is the perfect true-twin freestyle snowboard for progressive young riders. Effortless Mobility and Float AmpTek Auto-Turn Rocker provides incredible maneuverability, catch-free feel and instant float Lively Pop, Easy Control Twin Freestyle flex adds pop and balance for easy freestyle control Playful Freestyle Progression and Forgiveness Softer symmetrical flex offers easy manipulation and enhanced board control

Versatile, forgiving, and fun, the men's Rossignol Evader Snowboard is an all-mountain ride for building skills and expanding your range. The right combination of rocker and soft flex makes for a maneuverable, catch-free ride that lets you push into new terrain and explore the mountain in any snow conditions. Effortless Mobility and Float AmpTek Auto-Turn Rocker provides incredible maneuverability, catch-free feel and instant float Stability and Control Directional All-Mountain flex provides increased control on back foot and high stability for smooth turn initiation All-Mountain Progression and Forgiveness Softer flex offers ease of ride, gentle grip, and superior shock absorption Sustainability 100% of Rossignol's wood snowboard cores originate from sustainably-harvested forests - Shape: Directional - Insert setback: 1.3cm-1.3cm-2cm-2cm-2cm - Inserts number: 5*2 - Core: Wood 5620 - Base density: 4400 Extruded - Base details: 3642 (144), 3806 (149), 3979 (154), 4169 (159), 4333 (164) - Flex rate: Flex 3/10 - Waist: 24.5cm-24.7cm-24.9cm-25.2cm-25.4cm - Sidecut: Single Radius - Rocker Camber: Amptek Auto-Turn - Radius: 6.9m-7.2m-7.4m-7.6m-8.1m - Stance width min/max: 50 to 58cm-52 to 60cm-54 to 62cm-54 to 62cm-54 to 62cm - Suggested weight: 40 to 90kg / 90 to 200 lbs - Boot size: 29 to 29.5cm max Technologies: AMPTEK AUTO TURN ROCKER - Our three patented blends of rocker and camber are each tailored to a specific riding style and intensity level. Featuring a softer flex profile from tip to tail, AMPTEK AUTO TURN has an 80/20 rocker/camber blend for effortless turn initiation and an easy, playful ride. FLEX 3 - Rossignol snowboard FLEX ratings range from softest (1) to stiffest (10) so you can select the best flex pattern for your skill and riding style. Softer boards are easier to manipulate, stiffer boards offer more power and stability. ABS - Offered as walls or built in cores, ABS provides enhanced durability while keeping the core safe from moisture.