Skip to main content

Shop Online, by Email, by Phone or in Store  •  Curbside Pickup Available

Click Here To Email

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

BMX

Cinema BMX C4 Peg Sleeve
$5.99
Replacement nylon sleeve for the Cinema C4 peg. - Material: Nylon Composite - Length: 4.33" (110mm) - Diameter: 40mm - Core sold separately
Mission BMX Dual Cable Stop
$5.99
A replacement dual cable stop for bikes with a dual cable gyro setup. Fits most popular frames with removable brake mounts and cable stop. Product Specifications - Type: Single Screw - Includes: Cable Stop and Screw - Weight: 0.5oz
Mission BMX M24 Fork Cap Bolt
$5.99
Clean and simple, this fork cap bolt fits most modern forks on the market. CNC machined from 6061-T6 aluminum, providing strong threads and Allen key slot. This fork cap installs with a common 6mm Allen wrench. - Thread type: M24×P1.5 - Thread Length: 15mm - Weight: 0.7oz
Mission BMX Targa Peg Sleeve
$5.99
Replacement nylon sleeve for the Mission Targa peg. Sold individually. Product Specifications - Compatibility: Fits Mission Targa Peg Only - Material: Nylon Composite - Weight: 2oz
Stolen Thermalite Bar Plugz
$5.99
Unique design with Thermalite for durability. In-moldED Steel insert to eliminate bar punch through. Expands securely with a grub screw to fit tightly on regular, 9, 11, & 13 butt bars. - Expands securely with a grub screw to fit tight - Material: Thermalite - Weight: 1.0-ounces per pair
Stolen Thermalite Peg
$5.99
Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer). - Length: 4.4-inch - Diameter: 1.6-inch - Material: Plastic (Thermalite) - Weight: 0.8- ounce each - Replacement sleeve only - Sold individually
Kink Drift Peg Sleeve
$6.99
The Kink Drift pegs are made of a tough 7075-T6 aluminum core and replaceable durable nylon composite outer sleeve. Kink spent nearly two years developing this unique nylon material that provides the perfect combination of slide and wear resistance. When it does eventually wear out, this nylon sleeve can easily be replaced so your pegs slide like new. - Nylon sleeve only
Mission BMX Removable Gyro Tabs
$6.99
Single screw type removable gyro tabs. Fits most BMX frames with removable headtube gyro tabs. Product Specifications - Type: Single Screw - Includes: 2 Tabs and 2 Screws - Weight: 0.5oz
Mission BMX Strafe Peg
$7.99
No frills, affordable, durable, plain and simple. The Mission Strafe pegs are a perfect 4.5" long, and include an adapter for use with 14mm or 3/8" axles. Go get your grind on! - Sold individually - Material: Steel - Weight: 11.0-ounce
Odyssey Cable Knarps
$7.99
- Sold in pairs - Allen wrench included
Kink Gyro Tab Kit
$8.99
Removable Gryo Tabs - Fits all recent Kink complete bikes and aftermarket frames
Cinema BMX Beta Sprocket Guard
$9.99
Replacement high-impact plastic guard for the Cinema Beta sprocket. - Size: 25T - Material: High-impact plastic - Weight: 2.1 oz
Odyssey High Pressure Rim Strips
$9.99
When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.
Odyssey M2 Monolever Brake Cable
$9.99
The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible
Mission BMX Targa Peg
$10.99
The Targa peg features a super sturdy steel core covered in a durable nylon sleeve, allowing for grinds on unwaxed ledges and aluminum rails! Once you've ground through a sleeve, simply slide on a new Targa Peg replacement sleeve and get back to shredding! Sold individually. Product Specifications - Length: 4.5" (114mm) - Diameter: 40mm - Sleeve Material: Nylon Composite - Core Material: Steel - Size: 14mm (3/8" adapter Included) - Weight: 9oz (each)
Odyssey Par Ends
$10.99
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.
Kink Incite Axle
$12.99
BMX axles take a lot of abuse, and sometimes they need to be replaced. Kink makes it easy by providing replacement parts like this Incite replacement Incite Axle.
Kink Myriad Gyro Plate
$12.99
The Kink Gyro Plate is CNC machined from 6061-T6 aluminum, giving it a sleek and rigid design. The size is universal and will fit most modern (1 1/8") stems. This plate pairs perfectly with the Kink Myriad gyro, but will also work with other popular gyros on the market. TECH SPECS - Material: 6061-T6 Aluminum - Size: Universal - Weight: 0.4oz
Odyssey Ghost Brake Pads
$12.99 - $13.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake pad installation by eliminating the traditional dome shaped washers used for toe-in. The pad improves stiffness by building the toe-in into the pad shape and utilizing a solid extruded aluminum frame at its core. The Ghost Pad’s assembly consists of simply lining it up with the rim and tightening down an M6 female bolt. Comes stock on the Springfield brake. SPECS Hardware: - In-bound bolt, 5mm Hex Key, M6x1.0 Thread - Pad Material: Black (standard) or Clear Rubber (Soft) - Weight: 1.0oz / 28g (pair)
Odyssey Graduate Peg Replacement Sleeve
$12.99
The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic. - Sold singly
Odyssey Gyro G3 Lower Cables
$12.99
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
WeThePeople Cable Straps
$12.99
Keep your straps tidy and out of your way, using WeThePeople Cable Straps. They're easy to install and look good. This 10-pack helps keep that ride clean and tight. - 10 straps included
Cinema BMX S45 Peg Black
$13.99
The S45 peg is a 4.5-inch long, heat treated SCM415 chromoly steel peg, with internal butting and external reliefs to reduce weight without sacrificing strength. The forging process makes the S45 super strong and lasting, and the final CNC machining keeps the weight down and creates a smooth finish. Sold individually, 14mm and includes 10mm (3/8-inch) adapter. Material: Heat-Treated SCM415 Steel Length: 4.5" (114.5mm) Diameter: 1.45" (37mm) Sizes: 3/8" and 14mm Weight: 7.2 oz (each)
Odyssey Gyro G3 Upper Cables
$13.99
- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.
Odyssey Slim-By-Four Brake Pads
$13.99
The Slim by Four is a BMX-specific brake pad with a symmetrical shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. SPECS - Clear and Gum colored “Soft” compound pads provide extra grip on powder coated rims. - Black “Normal” compound Slim-By-Four pads are the most popular pad choice for most riders.
Kink Fork Cap Bolt
$14.99
The Kink fork cap bolt aims to make things just a little more convenient and is keyed for both a 6mm allen key and 3/8" ratchet drive. The cap itself is CNC machined from high-grade 7075-T6 aluminum to provide the strongest threads possible. The M24×P1.5 thread size is standard across all Kink forks, and on a majority of other forks, as well. TECH SPECS - Thread Type: M24×P1.5 - Tool Type: 3/8" Ratchet and 6mm allen hex - Material: 7075-T6 Aluminum - Weight: 0.8oz
GSport G.L.A.N.D. MK IV Hub Guards
$16.99
The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.
Kink 2XOG Peg
$17.99
Kink BMX got its start making axles and pegs in the 1990s, so you could say we've learned a thing or two about making pegs over the years. The Kink 2XOG (aka Double OG) pegs are all about simplicity and durability. The no-frills, forged, machined, and heat-treated SCM415 steel construction 2XOG pay proper homage to the classic indestructible Kink OG pegs. Generous 4.5" length, 1.45" diameter, and classic Black Oxide or Chrome finishes. Steel is real. TECH SPECS - Material: Heat treated SCM 415 steel - Length: 4.5" (114.5mm) - Diameter: 1.45" (37mm) - Size: 3/8" and 14mm - Weight: 7.3oz (each)
Odyssey Linear Slic Kable w/K-Shield
$17.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm
Stolen Silencer V2
$17.99
The Silencer V2 has a lightweight 6061 aluminum core supports the entire sleeve. The sleeve is made from our proprietary Thermalite material and resists cracking and deformation while sliding better than chromoly on most surfaces. The lengthy 4.4" peg ensures you maintain locked into grinds. - Axle: 3/8" with included 10mm adapter - Diameter: 1.6" - Length: 4.4" - Weight: 5.3-ounce each - Sold individually
Page 1 of 3 Next page